Konica Minolta bizhub PRO C1060L bizhub PRESS C1070/C1070P/C1060/bizhub PRO C1 - Page 78
Executing calibration using the image controller, Start, EFI Spectrometer ES-1000
View all Konica Minolta bizhub PRO C1060L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
5.2 Image Quality Adjustment ) Press Start. A chart is printed out, and calibration is carried out. Executing calibration using the image controller This section describes how to carry out calibration for daily maintenance using Fiery Command WorkStation and a colorimeter (EFI Spectrometer ES-1000). Tips Tips This section describes how to carry out calibration when using coated paper as an example. " Use a USB cable to connect EFI Spectrometer ES-1000 to your computer. For information about EFI Spectrometer ES-1000 setting and adjustment, refer to the manual supplied with this machine. # Start Fiery Command WorkStation. For information about how to start this application, refer to page 3-16. $ Click [Job Center] - [Calibrate] in se- quence. Calibrator starts. % Select the printing preferences for cali- bration. - Calibrate: Coated - Paper source: Paper tray with coated paper loaded - Measurement method: EFI ES-1000 NOTICE This section describes how to specify a printing environment when using coated paper as an example. Specify a printing environment according to the paper and tray actually used. 5-20