Konica Minolta pagepro 1390MF pagepro 1390MF Warranty Exchange Guide - Page 3

Introduction Thank you for contacting a technical support representative to obtain information about returning your PagePro 1390 MF for warranty exchange. Follow these instructions very carefully. If you need additional assistance, refer to the General Information Guide (included with the original all-in-one) or printer.konicaminolta.com for worldwide sources of service and support. Attention Failure to follow these instructions could result in voiding your warranty. Exchange Procedure Each of these steps is explained in detail in this guide. 1 Unpack the exchange all-in-one, and unlock the scan- See page 2. ning unit. 2 Prepare the original all-in-one-turn it off, disconnect See page 3. the USB cable, unplug the power cord, disconnect the telephone line(s) and ADF cable, remove the output tray, remove the media and media tray, and then remove the input tray and media stopper from the automatic document feeder (ADF). 3 Move the imaging cartridge from the original all-in-one See page 6. to the exchange all-in-one. 4 Finish setting up the exchange all-in-one-attach the See page 7. input tray and media stopper to the ADF, attach the media tray and fill it with paper, attach the output tray, connect the ADF and USB cables, connect the telephone line(s), plug in the power cord and USB cable, and turn on the all-in-one. 5 Lock the scanning unit, repack the original all-in-one, See page 12. and then call the shipper for pickup. Introduction 1