Konica Minolta pagepro 4650EN pagepro 4650EN/5650EN User Manual - Page 195

Error Messages (Operator Call: ) This message... CHECK LEVER FACE UP TRAY IS SELECTED COVER OPEN DUPLEX COVER COVER OPEN FINISHER COVER COVER OPEN REAR COVER COVER OPEN TOP COVER HOLD JOB ERROR UNABLE TO STORE JOB HOLD JOB ERROR "OPTIONAL" PRESS CANCEL INCORRECT TRAY MEMORY FULL PRESS CANCEL means... do this... The face up lever is raised when duplex printing or sub tray output is specified. The duplex cover is open. Pull the face up lever down. Close the duplex cover. The offset tray cover Close the offset tray is open. cover. The printer's rear cover is open. Close the rear cover. The printer's top cover is open. Close the top cover. The specified print job Print jobs can be saved saved on the hard only if a hard disk is disk is sent while the installed. If desired, hard disk is not install a hard disk. installed. When printing a Change the printer con- stored job, the printer figuration to that when configuration was the job was stored. changed since the job was stored. The installed option Turn off the power of the tray is an unap- printer, and then remove proved type. (pagepro the tray. 5650EN only) The printer has received more data than can be processed with its internal memory. Press the Cancel key to cancel the print job. Decrease the amount of data to be printed (for example, by decreasing the resolution), and then try printing again. If that doesn't solve the problem, install an optional memory module. Status, Error, and Service Messages 185