Kyocera 141000 Instruction Manual - Page 10
<Display
UPC - 067215015281
View all Kyocera 141000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
The Contax N1's viewfinder serves as the main information source for focus, exposure and film status. The viewfinder display turns on when the operations below are performed, then automatically turns off after 16 seconds to save power. 0 When the main switch is turned on. © When the exposure check button is pressed or shutter button is half-pressed while the main switch is turned on. If some action is taken, such as changing aperture, shutter speed or any dial is used while the viewfinder display is lit, the display time is extended another 16 seconds. • The time display (power hold time) can be changed. (Page 74) The viewfinder display turns off in the following cases: • During shooting. • When the end of the film is reached. • While the film is rewinding. • When rewinding is completed. • In the all imprint mode. • When there is a film advance error. • When the battery is spent. • When the exposure mode lever is set to ISO or CF. The display panel can be illuminated when viewing conditions require. The light turns on and off each time the "LIGHT" button is pressed. LIGHT" button • If other dials or buttons are operated while the display panel is lit, the duration of illumination is automatically extended. The display panel light turns off as soon as the shutter is released. 10