Kyocera Ai5555 NC-2 Instruction Hand Book - Page 40

NetWare Configuration Using the Network Management Utility Using Help Screens Protocols Setup NetWare (continued) Disable Bindery Click on this box to enable or disable Bindery Services for Novell NetWare 4.x and above. Bindery is disabled when the check box is marked. When you disable Bindery, the print server will not support any of the print servers on the Bindery file server. Enable Ports When the check box is marked for any of the ports, then the port and the printer attached to it are enabled for printing. When the check box is empty, then printing is disabled and you cannot print to that printer. If you have not entered a password already, you will need to enter one now in order to make any entries or changes to this screen. The factory default password is "sysadm." Enter the password in lowercase. Click on [Accept Settings] when you are finished making your entries. This puts your new entries into effect. Click on [Clear Inputs] to clear the entries you made or to revert to the previous settings. Setup Banyan VINES This screen lets you enter a login name and password for the print server, as well as service names for each print server port. During initial installations, you must do this IMMEDIATELY after the hardware installation, because the login name, password and service names must be downloaded to the print server before it can be used. This screen can also be used to change and of the names or passwords. Each field is described below. Enable VINES When this check box is marked, the print server is enabled for the Banyan VINES protocol. If the check box is not marked, then the print server is not enabled for the protocol. To enable the protocol, click on the check box. An X will appear in the box, indicating the enabled protocol. NetWare Configuration 3-19