Kyocera Ai6060 PCU-1 Instruction HB - Page 80

Printer Drivers Printing Modes The PCU-1 controller supports a variety of finishing modes that are described below. Actual performance depends upon the capability of your print engine. 2-in-1 Mode Scan two pages into memory and copy them onto one standard size sheet. The images are output in sequential order and arranged from left to right. 4-In-1/Booklet Mode Scan 8.5"x11" images into memory and print them in signature booklet format on 11"x17" (folding to 8.5"x11") or on 8.5"x11"R (folding to 5.5"x8.5"). You may use either 1-1 or 1-2 mode with the Booklet mode. Mode Restriction: Booklet mode cannot be used together with Sheet Insertion or the Manual Feed Tray. NOTE: Some applications, such as CorelDRAW, WordPerfect 6.0 for Windows, Apple Laser Writer 8.x drivers, have the ability to generate Booklet documents and other documents that have multiple images on one page. The PCU-1 cannot detect that any one of these options has been selected in an application. Therefore, if the Booklet mode is also selected in the PCU-1, output will not be as expected. Dual Access The Dual Access function provides an efficient means for your printer to handle two different jobs simultaneously, even for a copier job and a print job. The Electronic Recirculating Document Handler (E-RDH) allows the print engine to receive a job while it is printing scanned or stored documents. There are four types of Dual Access, as shown below: • Printing during Copying • Printing during Printing • Copying during Copying • Copying during Printing In the Copier Mode, the print engine controls and creates messages for the LCD operation panel. The LCD generates two screen types, namely, the Status Screen, and the Job Screen (a copier type tab-based screen). When the Print Mode is selected, the PCU-1 Print Controller will take over the control of the LCD operation panel screen and function according to its printing settings, values and parameters. 2-66 Printer Drivers