Kyocera ECOSYS FS-3640MFP FS-3540MFP/3640MFP Operation Guide - Page 61

Preparation before Use > COMMAND CENTER (Settings for E-mail) COMMAND CENTER (Settings for E-mail) COMMAND CENTER is a tool used for tasks such as verifying the operating status of the machine and changing the settings for security, network printing, E-mail transmission and advanced networking. NOTE Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the FAX Operation Guide. FAX functions are available only on products with the fax function installed. 1 Display the screen. 1 Launch your Web browser. 2 In the Address or Location bar, enter the machine's IP address. E.g.) http://192.168.48.21/ The web page displays basic information about the machine and COMMAND CENTER as well as their current status. 2 Configure the function. Select a category from the navigation bar on the left of the screen. The values for each category must be set separately. If restrictions have been set for COMMAND CENTER, enter a password to access pages other than the startup page. The default password is "admin00". The password can be changed. For details, refer to the KYOCERA COMMAND CENTER Operation Guide. 2-21