Kyocera ECOSYS FS-3920DN FS-2020D/3920DN/4020DN Operation Guide (Basic) - Page 86
Rear Unit, Envelope Feeder, Bulk Paper Feeder
View all Kyocera ECOSYS FS-3920DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
5-18 Rear Unit 1 If paper is not completely ejected into the output tray, open the rear unit. 2 Open the fuser cover and remove the jammed paper by pulling it out. Note If you cannot find a paper jam, try checking inside the rear of the printer. CAUTION The fuser unit inside the printer is hot. Do not touch it with your hands as it may result in burn injury. Remove jammed paper carefully. 3 Close the rear unit. The printer warms up and resumes printing out. Envelope Feeder Paper is jammed at the optional envelope feeder. Remove the jammed paper using the same procedure as for a jam at the MP Tray. Then, open and close the paper transfer unit. For details, refer to the User's Manual for the envelope feeder. Bulk Paper Feeder Paper is jammed at the optional bulk paper feeder. Detach the bulk paper feeder from the printer by sliding with the rail away from the printer, holding the bulk paper feeder by both hands. If paper is partially fed out from the feeder's output slot, pull the paper out by hand. Troubleshooting