Kyocera ECOSYS M3655idn M3655idn/M3660idn/M3145idn/M3645idn Operation Guide - Page 81
IPv4 setting, Display the screen., Con the settings.
View all Kyocera ECOSYS M3655idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Installing and Setting up the Machine > Network Setup IPv4 setting 1 Display the screen. [System Menu/Counter] key > [System/Network] > [Network] > [Wired Network Settings] > [TCP/IP Setting] > [IPv4] 2 Configure the settings. When using DHCP server [DHCP]: Set to [On]. When setting the static IP address [DHCP]: Set to [Off]. [IP Address]: Enter the address. [Subnet Mask]: Enter the subnet mask in decimal representation (0 to 255). [Default Gateway]: Enter the address. [Auto-IP]: Set to [Off]. When using the Auto-IP, enter "0.0.0.0" in [IP Address]. IMPORTANT After changing the setting, restart the network from System Menu, or turn the machine OFF and then ON. Restart Network (page 8-38) NOTE Ask your network administrator for the IP address in advance, and have it ready when you configure this setting. In the following cases, set the IP address of DNS server on the Command Center RX. • When using the host name with "DHCP" setting set to "Off" • When using the DNS server with IP address that is not assigned by DHCP automatically. Setting the IP Address of the DNS Server, refer to the following: Command Center RX User Guide 2-26