Kyocera ECOSYS M6035cidn Kyocera Net Viewer Operation Guide Rev 5.4 2014.09 - Page 47
Authentication Settings, Setting User Authentication, Permitting Jobs with Unknown IDs
View all Kyocera ECOSYS M6035cidn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Device message informs you the protocol data is sent to the device. The Certificates dialog box displays updated protocol information. 5 Click Close. Authentication Settings Authentication Settings provides a convenient way for administrators to manage user authentication and network user properties. Only one Authentication Settings dialog box can be opened per device. A maximum of three dialog boxes can be open (for three different devices) at the same time. Setting User Authentication With Authentication Settings, an administrator can configure some MFP devices to require a user login before it is accessed. If you select Use local authentication, the device uses the Device User List to authenticate the login user. If you select Use network authentication, the device uses the domain server to authenticate the login user. Support varies by model. 1 Select a device from the device list. 2 Click Device > Advanced > Authentication settings. 3 If you want to set user authentication as a device setting, click Enable user login. 4 Select the authentication mode. If you select Use local authentication, go to Step 9. If you selected Use network authentication, the related text boxes below it become available. Only ASCII characters are allowed in the text boxes. 5 Type a domain name in the Domain name text box to a maximum of 256 characters, depending on the format of the firmware file used on your device. For some models, multiple domains can be selected from a list of registered domains. If more than one domain is specified, select one for the default. 6 Select a Server type from the list. If the server type is not Ext., only Server type and Host name settings are available. 7 Type a host name or IP address in the Host name text box. 8 Type a Port number, if available. The valid range is 1-65535. 9 You can proceed through the rest of the dialog box, or you can click OK to save your settings and close the dialog box. Permitting Jobs with Unknown IDs If you want a device to have no user restrictions and accept print jobs without a user login and password, you can select the Permit jobs with unknown IDs check box. The check box is cleared by default. KYOCERA Net Viewer 5.4 3-25