Kyocera ECOSYS P3150dn P3145dn/P3150dn/P3155dn Operation Guide - Page 184

Setup and Registration (System Menu) > System Menu Item Description Power Off Timer (models for Europe) Select whether to turn off the power automatically after a period of inactivity. Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day,  2 days, 3 days, 4 days, 5 days, 6 days, 1 week WeeklyTimer Set. Configure settings for switching the machine to OFF and waking it automatically at a specified time for each day of the week. Weekly Timer Select whether to use Weekly Timer. Value: Off, On Schedule Specify the time for each day of the week at which the machine turns OFF. Retry Settings - Limited Retries Set whether or not retry of machine power-off is performed. Value: Off, On Retry Times Set the number of retries for turning OFF this machine. Value: 0 to 10 times NOTE This function is displayed when [Limited Retries] is set to [On]. Retry Interval Set the retry interval. Value: 10 to 60 seconds (increments of 10 seconds) Auto Err. Clear If an error occurs during processing, processing stops to wait for the next step to be taken by the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time elapses. Value: Off, On Err. Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Value: 5 to 495 seconds (in 5 second increments) NOTE This function is displayed when [Auto Err. Clear] is set to [On]. FormFeed TimeOut Receiving print data from the computer, the machine may sometimes wait if there is no information signaling that the last page does not have any more data to be printed. When the preset timeout passes, the machine automatically prints paper. The options are between 5 and 495 seconds. Value: 5 to 495 seconds (in 5 second increments) Ping Timeout Set the time until timeout occurs when [Ping] is executed in "Network". Value: 1 to 30 seconds (in 1 second increments) *1 Displayed only when the optional Card Authentication Kit is activated. *2 Displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed. Disp. Status/Log [Menu] key key > [Device Common] > [OK] key key > [Disp. Status/Log] > [OK] key Item Disp. Status/Log JobsDetailStatus Jobs Log Description Set the display method of the Status/Log. Value: Show All, My Jobs Only, Hide All Value: Show All, My Jobs Only, Hide All 8-32