Kyocera ECOSYS P6130cdn IB-51 WEB Browser Management Guide - Page 16
of 22, Using a Web Browser to Manage the IB-51
View all Kyocera ECOSYS P6130cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Using a Web Browser to Manage the IB-51 Page 16 of 22 Write Community sysContact sysName sysLocation HP Web Jetadmin Compatibility This setting functions similarly to the read community setting except that it is used for SNMP requests to write values. This is the MIB-II sysContact object, which typically contains the email address of the network administrator. This is the MIB-II sysName object, which typically contains the host name or domain name of the IB-51. This is the MIB-II sysLocation object, which typically contains information about the location of the IB-51. Enables (YES) or disables (NO) compatibility with HP Web Jetadmin. 4-16. Management/E-mail > SNMP > Trap If you are using the SNMP protocol and an error such as paper out occurs, the IB-51 generates a trap and sends it to the trap recipients. You can setup two trap recipients. The setting details are the same for both recipients. Item Authentication Traps Trap Community Trap IP Address (IPv4/IPv6) Trap IPX Address Selected Errors Description Enables (On) or disables (Off) the MIB-II EnableAuthenTrap object. If this setting is enabled (On), an SNMP trap is generated if an attempt is made to read or write using an invalid community string. The trap is sent to the contained trap address. The SNMP trap community string used when the IB-51 generates a trap. The IP address that receives traps. The IPX address that receives traps. Select the events that generate traps from Low Toner, Add Toner, Paper Jam, Add Paper, Cover Open, and All Other Errors. 4-17. Management/E-mail > LDAP The IB-51 can refer to the LDAP server. Item LDAP Settings Shared Address Book LDAP LDAP Encryption LDAP Server Name LDAP Port Number Search Timeout Login User Name Login Password Description Enable (on) or disable (off) the LDAP server. Selects the type of encryption according to the type of security employed by the LDAP server. Select Off when encryption is not used. - LDAPv3/TLS - LDAP over SSL - Off - To activate the configuration, the Encryption needs to be set to ON. Specifies a name or IP address for the LDAP server. Specifies a port number for LDAP or use the LDAP default port 389. Specifies a period of time for searching the LDAP server. Specifies the user name. Specifies the password. file:///C:/Tom/PDF/IB-51/IB-51%20Setup%20Guide%20HTML%20English/card_homepa... 10/2/2012