Kyocera ECOSYS P8060cdn PCL Barcode Flash 3.0 User's Manual Rev 3.2.03.2013 - Page 43
Datamatrix mode for printing from SAP
View all Kyocera ECOSYS P8060cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
The amount of base data has to be stated only if the base data is passed in the first of the ways mentioned below: 1. By means of an attachment after the semicolon that closes the BARC command, in this case the number of bytes has to be stated. 2. In inverted commas. 3. By means of an attachment after the semicolon that closes the BARC command. The bytes are closed by means of the WRED command. Example 1 !R!UNIT D;BARC 100,10,13,14,0,0,11;EXIT; here is equivalent to exactly 11 bytes (including brackets). Example 2 !R!UNIT D;BARC 100,10,13,14,0,0,"";EXIT; In this case, the bytes do not have to be stated. Example 3 !R!UNIT D;BARC 100,10,10,14,0,0;WRED;EXIT; In this case too, the bytes do not have to be stated. In example 3, the symbol number 10 is forced by entering the range from 10 to 10. Note BARC 100 cannot be called from PRESCRIBE macros. 3.3.2 Datamatrix mode for printing from SAP A second variant for printing Datamatrix from PRESCRIBE is also available. This method has been designed especially for printing from SAP. It uses the ID number 120 (instead of 100). The essential difference is that the useful data do not follow directly after the command, but rather must be located in one or more subsequent TEXT commands. Otherwise the BARC command is formed with the same parameters as in the variant with 100. In this connection, the BARC command is treated internally not so much as a barcode command, but rather to some extent as a kind of font command that simply switches from the font mode to the barcode mode. If multiple TEXT commands are used instead of a single TEXT command, their content is then combined in their direct sequence. In order to end the barcode mode 43