Kyocera FS-1120D 120V FS-1120D/1320D Operation Guide Rev-1 - Page 35
Special Paper, Transparency, Labels
View all Kyocera FS-1120D 120V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Loading Paper Special Paper The following types of special paper can be used: • Thin paper (60 to 64 g/m²) • Thick paper (90 to 220 g/m²) • Colored paper • Recycled paper • Overhead projector transparencies • Cardstock • Coated paper • Envelopes • Labels Use paper that is sold specifically for use with copiers or printers (heatfusing type). When using transparencies, labels, envelopes, cardstock, coated, or thick paper, feed the paper from the MP Tray. Since the composition and quality of special paper vary considerably, special paper is more likely than white bond paper to give trouble during printing. No liability will be assumed if moisture and so forth given off during printing on special paper causes harm to the machine or operator. Note Before purchasing any type of special paper, test a sample on the machine and check that printing quality is satisfactory. Half speed mode is automatically engaged depending on Media types , including Labels, Rough, and Thick. Transparency This printer is available for monochorome printing on transparencies. Transparencies must be fed to the MP Tray. One transparency can be loaded at a time. Transparencies must be able to withstand the heat of fusing during the printing process. Transparencies must be placed on the MP tray with the long edge towards the printer. Labels Labels must be fed to the MP Tray. One label can be loaded at a time. The basic rule for printing on adhesive labels is that the adhesive must never come into contact with any part of the machine. Adhesive paper sticking to the drum or rollers will damage the machine. Label paper has a structure comprising of three layers, as shown in the diagram. The top sheet is printed on. The adhesive layer consists of pressure-sensitive adhesives. Top sheet (white bond paper) Adhesive The carrier sheet (also called Carrier sheet the linear or backing sheet) holds the labels until used. Due to the complexity of its composition, adhesive- backed label paper is particularly likely to give printing problems. 2-7