Kyocera FS-1120D FS-1120D/1320D Operation Guide Rev-1
Kyocera FS-1120D Manual
View all Kyocera FS-1120D manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-1120D manual content summary:
- Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 1
FS-1120D FS-1320D OPERATION GUIDE Please read this Operation Guide before using this machine. Keep it close to the machine for easy reference. - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 2
followed, in brackets, by the corresponding information for the metric version. This Operation Guide is intended to help you operate the machine correctly, perform routine maintenance and take a simple troubleshooting action as necessary, so that you can always use the machine in good condition - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 3
)Tray 2-14 3 Connecting and Printing 3-1 Connections 3-2 Installing the Printer Driver 3-3 Printing 3-9 Status Monitor 3-10 Configuration Tool 3-14 Uninstalling Software (Windows PC 3-18 4 Maintenance 4-1 General Information 4-2 Toner Container Replacement 4-2 Maintenance Kit Replacement - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 4
ii - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 5
information on the following topics: Legal Information iv License Agreements v Safety Information ix Symbols xiii Installation Precautions xiv Precautions for Use xvi About the Operation Guide xviii Conventions in This - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 6
USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION MODE. The printer is factory-set to emulate the PCL. The emulation mode can be changed. Notice The information in this guide is subject to change without notification. Additional pages may be inserted in future editions. The user is asked - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 7
License Agreements IBM Program License Agreement THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS ("PROGRAMS") WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION ("IBM"). THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 8
card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multi-user license agreement which can - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 9
will perform in accordance with Monotype Imagingpublished specifications, and the diskette will be free from the Software is free from all bugs, errors and omissions. 8. THE PARTIES AGREE THAT defective parts, upon their return to Monotype Imaging. 10. IN NO EVENT WILL MONOTYPE IMAGING BE LIABLE - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 10
equipment has been tested and found to not installed and used in accordance with the instructions, may cause harmful interference to radio communications. approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 11
exposure. Radio Frequency Transmitter This machine contains a transmitter module. We, the manufacturer (Kyocera Mita Corporation) hereby declare that this equipment (page printer), model FS-1120D and FS-1320D are in compliance with the essential requirements and other relevant provisions of - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 12
August 1, 1976. Compliance is mandatory for products marketed in the United States. A label indicating compliance with the CDRH regulations must be attached to laser products marketed in the United States. Ozone Concentration These printers generate ozone gas (O3), which may concentrate in the place - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 13
is in conformity with the following specifications. EN55024 EN55022 Class B EN61000 im unmittelbaren Gesichtsfeld platziert werden. Disclaimer Kyocera Mita will not be liable to including but not limited to, any interruption of service, loss of business or anticipatory profits, or consequential damages - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 14
Safety Instructions Regarding the Disconnection of Power Caution: The power plug is the main isolation of paper as a duplex printing, it is possible to lower the amount of paper used. Recycled Paper This printer supports recycled paper which reduces the load on the environment. Your sales or service - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 15
guide and parts of the machine marked with symbols are safety warnings meant to protect the user includes safety warnings. Specific points of attention are indicated inside the service representative to order a replacement if the safety warnings in this Operation Guide are illegible or if the guide - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 16
maintenance, allow access space as shown below. Leave adequate space, especially around the rear cover, to allow air to be properly ventilated out of the printer Avoid locations near a window or with exposure to printer is used over a long period of time in a poorly ventilated room or when printing - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 17
connection to avoid the danger of fire or electrical shock in case of an electric short. If an earth connection is not possible, contact your service representative. Other precautions Connect the power plug to the closest outlet possible to the machine. The power supply cord is used as the main - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 18
fire, electrical shock or damage to the laser. If the laser beam escapes, there is a danger of then contact your service representative. If anything harmful (paper clips, water, other electrical shock. Always contact your service representative for maintenance or repair of internal parts. Caution - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 19
cover, turn off the main power switch, or pull out the power plug during printing. When lifting or moving the machine, contact your service representative. Do not touch electrical parts, such as connectors or printed circuit boards. They could be damaged by static electricity. Do not attempt to - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 20
paper specifications for this printer and how to load paper into the cassette or MP tray. 3 Printing This chapter explains how to install the printer driver, print from your PC, and use the application software included in the CD-ROM. 4 Maintenance This chapter explains how to replace the toner - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 21
cleaning. CAUTION When pulling the paper, pull it gently so as not to tear it. Torn pieces of paper are difficult to remove and may be easily overlooked, deterring the paper jam recovery. WARNING If you ship the printer, remove and pack the developer unit and drum unit in a plastic bag and ship - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 22
xx - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 23
1 Machine Parts This chapter identifies machine parts, indicators, and operation panel keys. Components at the Front of the Printer 1-2 Components at the Rear of the Printer 1-3 Operation Panel 1-4 Indicators 1-5 Keys 1-6 Machine Parts 1-1 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 24
Components at the Front of the Printer 1 2 3 4 5 9 8 7 6 1 Top Cover 2 Paper Stopper 3 Top Tray 4 Operation Panel 5 Right Cover 6 Paper Cassette 7 Front Cover 8 MP Tray 9 Subtray 1-2 Machine Parts - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 25
Components at the Rear of the Printer 10 11 12 13 14 10 Optional Interface Slot Cover 11 USB Interface Connector 12 Rear Cover 13 Power Cord Connector 14 Power Switch Machine Parts 1-3 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 26
Operation Panel 1 2 6 3 5 4 7 8 1 Ready Indicator 2 Attention Indicator 3 Toner Indicator 4 Data Indicator 5 Paper Indicator 6 Jam Indicator 7 [Cancel] Key 8 [GO] Key 1-4 Machine Parts - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 27
Jam, Toner, Paper, and Attention. The printer status is normal. The printer has stopped because the toner is exhausted. The toner is running low. The printer status is normal. Note For other combinations of the six indicators, call for service. Status Monitor (software bundled with the KX Driver - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 28
seconds Press for 10 seconds or more Press momentarily Press momentarily Function Cancels the data from the PC Switches On-line/Off-line Prints the status page. Prints the service status page. Clears the error. Resumes printing by switching automatically to an available paper source. 1-6 Machine - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 29
This chapter explains paper specifications for this printer and how to load paper into the cassette or MP tray. General Guidelines Selecting the Right Paper Paper Type Preparing the Paper Loading Paper into Cassette Loading Paper into MP (Multi-Purpose)Tray 2-2 2-4 2-10 2-11 2-11 2-14 Loading - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 30
paper jams and other problems, and the higher the level of quality your printed output will reflect. Differences between paper from different suppliers can also affect the machine's performance. A high-quality printer cannot produce highquality results when the wrong paper is used. Low-priced paper - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 31
Sizes The minimum and maximum paper sizes are as follows. For the paper smaller than JIS B6, postcards, and envelopes, the MP tray must be used. Paper cassette MP tray Minimum Paper Size Minimum Paper Size 356mm (14 inches) 148mm (5-13/16 inches) 356mm (14 inches) 148mm (5-13/16 inches) 105mm - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 32
section describes the guidelines for selecting paper. Condition Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds. Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 33
that is too heavy or too light may cause feed errors or paper jams as well as premature wear of the product. Uneven weight of paper, namely uneven paper thickness may cause multiple-sheet feeding or print quality problems such as blurring because of poor toner fusing. The recommended basis weight is - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 34
the printing process the paper is electrostatically charged to attract the toner. The paper must be able to release this charge so that printed sheets do not cling together in the Output Tray. Whiteness: The contrast of the printed page depends on the whiteness of the paper. Whiter paper provides - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 35
or printers (heatfusing type). When using transparencies, labels, envelopes, cardstock, coated, or thick paper, feed the paper from the MP Tray. Since the composition and quality of special paper vary considerably, special paper is more likely than white bond paper to give trouble during printing - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 36
. • Avoid a long printing session for envelopes only. Extended envelope printing can cause premature printer wear. • If jams occur, try setting less envelopes on the MP tray. • To avoid jams caused by curled envelopes, stack no more than 10 printed envelopes on the output tray. 2-8 Loading Paper - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 37
paper jams. Note If the paper jams even after you smooth it out, load the paper in the MP Tray with the leading edge raised up a few millimeters as shown in the illustration. Colored Paper Colored paper should satisfy the same conditions as white bond paper. Refer to Paper Specifications on page - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 38
Yes: Can be stored No: Cannot be stored *. This is a paper type defined and registered by the user. Up to eight types of user settings may be defined. User can also enable or disable the duplex path when using Custom. For more information, refer to Status Monitor on page 3-10. 2-10 Loading Paper - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 39
to do so may result in a paper jam. IMPORTANT Ensure paper is not stapled and clips are removed. Loading Paper into Cassette 250 sheets of 11 × 8 1/2" or A4 paper (80 g/m²) may be loaded into the Cassette. 1 Pull the cassette completely out of the printer. IMPORTANT When pulling the cassette out of - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 40
the paper length guide to the paper size required. If you are going to use paper that is longer than A4, pull out the extension paper cassette by pushing the release lever one by one and adjust it to the desired paper size. 5 Load the paper in the cassette. Ensure the side to be printed is facing - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 41
triangle mark located on the width guide. 6 Insert the paper cassette into the slot in the printer. Push it straight in as far as it will go. There is a paper gauge on the left side of the front of the paper cassette to indicate the remaining paper supply. When paper is exhausted, the pointer will - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 42
. IMPORTANT When pulling the cassette out of the printer, ensure it is supported and does not fall out. 2 Adjust the position of the paper guides on the MP tray. Standard paper sizes are marked on the MP tray. For standard paper sizes, slide the paper guides to the corresponding mark. 3 Pull out the - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 43
and keep the printing side face-up. Insert envelope against the guide with the flap on the front or left side until they stop. Incorrect 1 2 5 Specify the paper size and type for MP tray using Configuration Tool. For more information, refer to Configuration Tool on page 3-14. Paper Stopper Open - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 44
2-16 Loading Paper - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 45
This chapter explains how to start up the printer, print from your PC, and use the application software included in the CD-ROM. Connections Installing the Printer Driver Printing Status Monitor Configuration Tool Uninstalling Software (Windows PC) 3-2 3-3 3-9 3-10 3-14 3-18 Connecting and - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 46
a moment the indicators light in anticlockwise direction. When the printer is first switched on after toner installation, there will be a delay of approximately 15 minutes before the printer gets ready to print. Once the [Ready] indicator lights, printer installation is complete. 3-2 Connecting - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 47
the CD-ROM. Installing the Software in Windows If you are connecting this printer to a Windows PC, follow the next steps to install the printer driver. The example shows you how to connect your printer to a Windows Vista PC. Note In Windows operating systems, you must be logged in with administrator - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 48
installed in the print system. You can also specify the device settings after you exit the installation. For details, refer to Device Settings in the printer driver operation manual on the CD-ROM. This completes the printer driver installation procedure. Follow the on-screen instructions to restart - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 49
manual on the CD-ROM. Installation on a Macintosh This section explains how to install the printer driver in Mac OS. 1 Turn on the printer and the Macintosh. 2 Insert the included CD-ROM (Product Library) into the CD-ROM drive. 3 Double-click the CD-ROM icon. 4 Double-click either OS X 10.2 and 10 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 50
Kyocera OS X x.x. 6 The printer driver installation program starts up. 7 Choose Select Destination, Installation Type and then install the printer driver as directed by the instructions operating system. This completes the printer driver installation. Next, specify the print settings. If an IP, - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 51
9 Click the plus symbol (+) to add the installed printer driver. 10 Click the IP icon for an IP connection and then enter the IP address and printer name. When you click the AppleTalk icon for an AppleTalk connection, enter the printer name. For a Bonjour connection, click the default icon and - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 52
13 The selected printer is added. This completes the printer setup procedure. 3-8 Connecting and Printing - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 53
, refer to the Printer Driver User Guide in the CD-ROM. About KX Driver KX Driver consists of the following tabs. Quick Print Use this tab to define basic print options into group profiles that can be accessed quickly and easily. Basic Use this tab to select the page size and orientation. The - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 54
tray. 5 To start printing, click OK. Status Monitor The Status Monitor monitors the printer status and provides an ongoing reporting function. It also allows you to specify and modify settings for printers not included in the KX Driver. The Status Monitor is installed automatically during KX Driver - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 55
notification settings, refer to Status Monitor Settings on page 3-12. Status Monitor icon The Status Monitor icon is displayed in the taskbar notification area when the Status Monitor is running. When you position the cursor over the icon, the printer name appears. Connecting and Printing 3-11 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 56
option to set up the Status Monitor. Sound Notification Tab The requires the sound capabilities such as sound card and speaker. Enable Event Notification Select to a sound file is unnecessary, this function is applicable for Windows XP or later. To use this function, follow these steps. Printing - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 57
Tab The Appearance tab is contains the following items. Enlarge window Doubles the size of the Status Monitor window. Always on top Positions the Status Monitor in front of other active windows. Transparency Displays the Status Monitor as a transparent window. Connecting and Printing 3-13 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 58
for printers not included in the KX Driver. The Configuration Tool can be used for printers connected to Status Monitor icon in the Windows taskbar. 2 Select Configure the Printing System from the menu. The Configuration Tool window appears. Note When the printer is connected with the network - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 59
Status tab displays current information about the device, such as the model name, system firmware, engine firmware, serial number, total memory, and number of printed pages. Input Tab The Input tab displays information about the paper feeder attached to the machine, such as the current paper level - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 60
Printer Tab The Printer tab allows you to set print processing parameters that are not available in the KX Driver. As well as the form and buffer mode of the printer for communication processing to the host. Data Tab The Data tab fetches and lists the data stored in the CF card or RAM disk. Select a - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 61
RAM disk Description Configures the amount of time when the printer automatically enters Sleep Mode. Click Advanced to turn Auto sleep power consumption to a minimum by turning off the heater of the fixing unit at Sleep Mode. The default setting is On. Locks or unlocks the operation Printing 3-17 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 62
Library) into the CD-ROM drive. In Windows 7, Windows Server 2008 and Windows Vista, the user account control window may appear. Click Allow. 3 Following the procedure used to install the printer driver, click Remove Software. The Kyocera Uninstaller wizard appears. 4 Select the software package - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 63
4 Maintenance This chapter explains how to replace the toner container and clean the printer. General Information 4-2 Toner Container Replacement 4-2 Maintenance Kit Replacement 4-5 Cleaning the Printer 4-6 Prolonged Non-Use and Moving of the Printer 4-9 Maintenance 4-1 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 64
pages (FS-1120D). Starter Toner Container The toner container packed with the new printer is a starter toner container. The starter toner container lasts an average of 2,300 pages (FS-1320D) or 1,000 pages (FS-1120D). Toner Kits For best results, we recommend that you only use genuine Kyocera Parts - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 65
is also recommended to use only the Kyocera toner containers which are specifically intended for use in your country or region. If the toner container for another destinations is installed, the printer will stop printing. Note You do not have to turn printer power off before starting the replacement - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 66
3 Take the new toner container out of the toner kit. Shake the new toner container at least 5 times as shown in the figure in order to distribute the toner evenly inside the container. 4 Remove the label from the toner container. 5 Install the new toner container in the printer. Push firmly on the - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 67
pages, a message is printed indicating that the maintenance kit should be replaced. The maintenance kit must then be replaced immediately. To replace the maintenance kit, contact your service technician. IMPORTANT When the waste toner in the drum unit is almost full, [Attention] indicator and [Toner - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 68
unit together with the toner container out of the printer. Developer Unit Drum Unit 3 Remove the drum unit from the printer by holding the green levers with both hands. Note The drum unit is sensitive to light. Never expose the drum unit to light for more than five minutes. 4-6 Maintenance - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 69
roller. IMPORTANT Take care not to touch the transfer roller (black) during cleaning. 6 On the drum unit, slide the charger cleaner (green) back and forth 2 or 3 times to clean the charger wire position. 7 When cleaning is complete, return the drum unit to the original position. Maintenance 4-7 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 70
8 Return the developer unit to its position, aligning the guides at both ends with the slots in the printer. Then, close the front cover and top cover. 4-8 Maintenance - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 71
spilling toner inside the printer. • Be sure to consult a service technician before attempting longdistance transportation of the printer. WARNING If you ship the printer, remove and pack the developer unit and drum unit in a plastic bag and ship them separately from the printer. Maintenance 4-9 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 72
4-10 Maintenance - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 73
5 Troubleshooting This chapter explains how to handle printer problems, understand indicator combinations, and clean paper jams. General Guidelines 5-2 Print Quality Problems 5-3 Understanding Indicators 5-5 Cleaning Paper Jams 5-11 Troubleshooting 5-1 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 74
to Print Quality Problems on page 5-3. This is a problem specific to the Windows OS. It is not a printer problem. It does not affect print quality. Refer to Cleaning Paper Jams on page 5-11. Connect both ends of the power cord securely. Try replacing the power cord. Refer to Installation Guide for - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 75
Full single-color printout Contact your service technician. Dropouts, stray dots Drum or developer unit may be damaged. If the problem is not solved even after printing several pages, call for service. Vertical streaks Troubleshooting Check the toner container and if necessary replace. Refer - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 76
replace. Refer to Toner Container Replacement on page 4-2. Check the developer unit and drum unit are installed correctly. Refer to Cleaning the Printer on page 4-6. Dirt on the top edge or back of the paper If the problem is not solved even after printing several pages, clean the registration - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 77
into one of three categories: normal operation, maintenance and errors (repairs). Click the icon to play downloads/). Normal Indication The table below shows the indicator combinations when the printer status is normal. Meaning The printer is canceling data. The printer is warning up. The printer - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 78
The printer is installing toner. The printer is receiving data. The printer is receiving data. Printing resumes when the [GO] is pressed. The printer is printing the last page after waiting. Printing is possible. Offline status. You cannot print, but the printer can receive data. The printer returns - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 79
Indicator [Ready] indicator is flashing slowly. Meaning The printer is in sleep mode.The printer returns to online status when the [GO] is pressed, the cover is opened and closed, or the printer receives the print jobs. Troubleshooting 5-7 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 80
into the MP tray and press [GO] to begin printing. If you want to supply paper from a source other than the MP tray, you can change the paper source by pressing [GO]. If the paper fed from the MP tray is a different size from the specified paper size, a paper jam will occur. 5-8 Troubleshooting - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 81
container, clean the inside of the printer. The installed toner container's regional specification does not match the printer's. Install the specified toner container. Unable to print with the specified resolution due to insufficient memory. CF card is not formatted. Add the expansion memory - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 82
. The current printing cannot be continued. Unable to print due to insufficient memory. Unable to print as the data Error Indication If the indicators light or flash repeatedly in manners not described above for normal or maintenance indication, a service error has probably occurred. Turn the printer - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 83
offline, and the Jam indicator will light. Status Monitor or COMMAND CENTER can indicate the location of the paper jam (the component where the paper jam has occurred). Remove the paper jam. After removing the paper jam, the printer will resume printing. Possible Paper Jam Locations The figure below - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 84
, or flip the paper stack over. The printer may have problems if paper jams recur after the paper is replaced. • Whether or not the jammed pages are reproduced normally after printing is resumed, depends on the location of the paper jam. MP Tray 1 Remove the paper jammed at the MP tray. IMPORTANT Do - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 85
fed paper. IMPORTANT Do not try to remove paper that has already been partially fed. Proceed to Inside the Printer on page 5-15. Note Check to see if paper is loaded correctly. If not, reload the paper. 3 Push the cassette back in securely. The printer warms up and resumes printing. Troubleshooting - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 86
cover in front of the printer and remove any jammed paper. Open the duplexer's cover at the rear of the printer and remove any jammed paper. 5-14 3 Push the cassette back in securely, and open and close the top cover to clear the error. The printer warms up and resumes printing. Troubleshooting - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 87
drum unit from the printer by holding the green levers with both hands. CAUTION The fuser unit inside the printer is hot. Do not touch it, as it may result in burn injury. Note The drum is sensitive to light. Never expose the developer unit to light for more than five minutes. 4 If the jammed paper - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 88
5 Return the drum unit to its position, aligning the guides at both ends with the slots in the printer. 6 Insert the developer unit together with the toner container, back into the machine. Close the top cover and the front cover. The printer warms up and resumes printing. 5-16 Troubleshooting - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 89
Do not touch it, as it may result in burn injury. If the paper is jammed inside the fuser unit, open the fuser cover and remove the paper by pulling it out. 2 Close the rear cover, and open and close the top cover to clear the error. The printer warms up and resumes printing. Troubleshooting 5-17 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 90
5-18 Troubleshooting - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 91
6 Option This chapter explains the options for this printer. General Information 6-2 Expansion Memory Modules 6-3 Removing a Memory Module 6-5 Verifying the expanded memory 6-5 Paper Feeder (PF-100) 6-6 Network Interface Card (IB-23) 6-7 CompactFlash (CF) Card 6-8 Option 6-1 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 92
your printing requirements. Note Install the memory module before installing the optional paper feeder (PF-100). For instructions on installing individual options, refer to the documentation included with the option. Some options are explained in the following sections. Network Interface Card (IB - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 93
Expansion Memory Modules To expand the printer memory for more complex print jobs and faster print speed, you can plug in optional memory module (dual in line memory module) in the memory slot provided on the printer main controller board. You can select additional memory module from 64, 128, 256 or - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 94
Installing the Memory Module 1 Turn off the printer and disconnect the power cord and printer cable. 2 Remove the right cover as shown in the figure. 3 Remove the fixing tape in case of the first installation. Then, remove the memory slot - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 95
, remove the right cover and the memory slot cover from the printer. Then, carefully push out the two socket clamps. Ease the memory module out of the socket to remove. Verifying the expanded memory To verify that the memory module is working properly, test it by printing a status page. Option 6-5 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 96
(PF-100) The PF-100 allows you to add one (for FS-1120D) or two (for FS-1320D) more paper cassette to the bottom of the printer for continuous feeding of a large volume of paper. Each paper cassette can hold up to approximately 250 sheets of ISO A4, ISO A5, JIS B5, Letter, or Legal size (80g - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 97
Option Network Interface Card (IB-23) The network interface card supports TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols, so that the printer can be used on network environments including Windows, Macintosh, UNIX, NetWare, etc. The network interface card must be installed in the option interface - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 98
your service technician. 1 Turn off the printer and disconnect the power cord and printer cable. CAUTION Before inserting a CF card in the printer, make sure that the printer is switched off. 2 Open the rear cover. 3 Remove the optional interface slot cover. When the Network Interface Card is - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 99
4 Insert the CF Card. 5 Secure it with the screws removed in step 3. 6 Connect the power cord and printer cable and turn on the printer. Option 6-9 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 100
6-10 Option - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 101
7 Appendix This section lists the following information of this printer. Specifications 7-2 Environmental Standard Requirements 7-4 Appendix 7-1 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 102
Paper Capacity Cassette 1 Cassette 2 Cassette 3 MP Tray Output Tray Capacity Simplex Duplex Continuous printing Resolution Description FS-1120D FS-1320D Desktop Electrophotography, laser A6, B6, ISO B5, Envelope C5, Envelope #10, Envelope #9, Envelope #6-3/4, Envelope Monarch, Envelope DL - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 103
toner container) Power Requirements Power Consumption Maximum During printing During standby Options Sleep mode Power off Description FS-1120D FS-1320D 10 to 32.5°C/50 to 90.5°F 15 to 80 % 2,500 m/8,202 ft maximum 1,500 lux maximum PowerPC 405F5/360 MHz Microsoft Windows 2000/XP - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 104
following environmental standard requirements. • Time for switching to Sleep mode (default): 15 minutes • Duplex Printing: Standard Equipment • Durable paper for feeding: Paper made of 100% recycled paper NOTE: Contact your Dealer or Service Representative for recommended paper types. 7-4 Appendix - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 105
1-2 Fuser unit clearing paper jams 5-17 G General problems troubleshooting 5-2 GO key 1-4 operation panel 1-4 I IB-23 6-2, 6-7 Indicator combinations error 5-10 maintenance 5-8 normal 5-5 Indicators Ready, Data, Jam, Attention, Toner 1-5 Inside the printer clearing paper jams 5-15 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 106
, cleaning 4-1 Maintenance indication indicators 5-8 Memory module handling 6-3 Moving printer 4-9 MP tray basis weight 2-5 clearing paper jams 5-12 components 1-2 loading paper 2-14 minimum and maximum paper sizes 2-3 paper sizes 2-4 paper type 2-10 N Network interface card 6-7 option - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 107
panel 1-4 replacing toner container 4-2 Toner kit toner container, plastic waste bag, installation guide 4-2 Top cover components 1-2 Top tray components 1-2 Transparency 2-7 Troubleshooting 5-1 general problems 5-2 print quality problems 5-3 Turning on the power 3-2 U Understanding - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 108
Index-4 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 109
A1 - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 110
- Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 111
©2009 is a trademark of Kyocera Corporation - Kyocera FS-1120D | FS-1120D/1320D Operation Guide Rev-1 - Page 112
Rev.1 2010.2 Printed in China 302LZ56011
OPERATION GUIDE
Please read this Operation Guide before using this machine. Keep it close to the machine for easy reference.
FS-1120D
FS-1320D