Kyocera FS 1200 KX Driver Operation Guide Rev. 1.3.1 - Page 122
Virtual Mail Box VMB, Cancel, RAM Disk, Settings, Printing Virtual Mailbox Job Lists
View all Kyocera FS 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
5 Select Virtual Mail Box VMB and click Selection... . If Virtual Mail Box VMB is inactive, no virtual mailboxes have been created yet. Click Cancel in the screen above, and create a virtual mailbox while referring to RAM Disk Settings on page 33. 6 The Virtual Mailbox Selection dialog box appears. Select the mailboxes for saving the job, and click OK. 7 Close the Properties dialog box. The job is saved to the virtual mailbox on the hard disk and held for printing. • Printing the list -- Refer to the next section, Printing Virtual Mailbox Job Lists, below. • Printing saved jobs -- Refer to Printing Jobs in Virtual Mailboxes on page 119. Printing Virtual Mailbox Job Lists Follow these steps to print the jobs lists of virtual mailboxes. You can print a list if there is at least one job saved in the virtual mailbox. The list is printed from the printer operator panel. 1 On the printer operator panel, press the MENU key. 2 Press the S or Tkey repeatedly until e-MPS> is displayed. 3 Press the X key to access the submenu. 4 Press the S or T key repeatedly until >List of VMB appears. This menu is not displayed if all virtual mailboxes are empty. 5 Press the ENTER key. A blinking question mark [ ? ] appears. 6 Press the ENTER key again. The list will be printed. 118