Kyocera FS-1300D Kyocera Command Center Operation Guide Rev 6.3 - Page 43
You can add a Bonjour printer from the Mac OS X's Print Center., WINS Server Primary, Secondary - turn on dhcp
View all Kyocera FS-1300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
COMMAND CENTER Pages Specifies a name for the printing system network component. This name is also used as the NetBEUI printer name. IPv4 Settings • DHCP/BOOTP Specifies whether or not to automatically obtain an IP address using DHCP or BOOTP. • Auto-IP Turn On to automatically assign a unique IP address even though a DHCP server does not exist or DHCP setting is Off in the printing system. The range of the IP address to be assigned is from 169.254.0.0 to 169.254.255.255, which is reserved for Auto-IP. If an IP address is already assigned by a DHCP server, this does not resolve a new IP address. • IP Address Assigns an IPv4 address to the printing system network component. The format of the IPv4 address is a sequence of numbers (32-bit in total) separated by dots, e.g. 192.168.110.171. • Subnet Mask Specifies the subnet mask. • Default Gateway Specifies the IP address of the default gateway. • Domain Name Specifies the DNS (Domain Name System) name of the domain to which the printing system belongs. It should not contain the host printer name, for example, "abcde.com". • DNS Server (Primary, Secondary) Specifies the IP addresses of the primary and secondary DNS (Domain Name System) servers. When DHCP/BOOTP is turned On, you can select to use either the DNS servers obtained via DHCP or the DNS servers being set under this item. • WINS Server (Primary, Secondary) Specifies the IP addresses of the primary and secondary WINS (Windows Internet Name Service) servers. When DHCP/BOOTP is turned On, you can select to use either the WINS server obtained via DHCP or the WINS server being set under this item. • Bonjour Specifies whether or not to automatically obtain an IP address using Bonjour. You can add a Bonjour printer from the Mac OS X's Print Center. The following conditions must be satisfied to automatically obtain an IP address using Bonjour: • If DHCP/BOOTP is turned Off, an IP address should not be specified. • If DHCP/ BOOTP is turned On, automatic IP address assignment by the DHCP server should not be enabled. • To allow printing from the Mac OS X system, the printer needs to support KPDL. • Bonjour Name If Bonjour is turned On, this specifies the Bonjour name to be used. COMMAND CENTER 3-36