Kyocera FS-1300D PRESCRIBE Commands Technical Reference Manual - Rev. 4.7 - Page 101
Permanent Parameters
View all Kyocera FS-1300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Chapter 6 Permanent Parameters The printing system maintains a number of parameters in a non-volatile (flash) memory. These parameters control the initial state of the environment at power-up, including the initial emulation mode, page orientation, character set, buffer allocations in memory, interface parameters, and other options. The parameters may be changed permanently with the FRPO (Firmware RePrOgram) command. Some FRPO parameters affect only the current interface (interface-dependent) and some affect all interfaces at once (non-interface-dependent). If the printing system is shared with other users, remember that any changes to any non-interfacedependent parameters may interfere with the print jobs of the other users. This chapter explains the FRPO command and gives examples of its use. The current settings of the FRPO parameters are listed as option values on the printing system's service status page. Refer to the tables in this chapter to interpret the values. To print a service status page, command: !R! STAT 1; EXIT; Before changing any FRPO parameter, print out a service status page, so you will know the parameter values before the changes are made. To return FRPO parameters to their factory default values, send the FRPO INIT (FRPO-INITialize) command.