Kyocera FS-1320D FS-1120D/1320D Operation Guide Rev-1 - Page 97
Network Interface Card (IB-23), The network interface card supports TCP/IP, IPX/SPX, NetBEUI
UPC - 632983018194
View all Kyocera FS-1320D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Option Network Interface Card (IB-23) The network interface card supports TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols, so that the printer can be used on network environments including Windows, Macintosh, UNIX, NetWare, etc. The network interface card must be installed in the option interface slot that is located at the back of the printer. CAUTION Before inserting a network interface card in the printer, make sure that the printer is switched off. 1 Turn off the printer and disconnect the power cord and printer cable. 2 Open the rear cover. 3 Remove the optional interface slot cover. 4 Insert the Network Interface Card and secure it with the screws removed in step 3. 5 Close the rear cover, and connect the printer cable. 6 Connect the power cord, and turn on the printer. 7 Configure the network address from Quick Setup. For more information, refer to Operation Guide of the network card. 6-7