Kyocera FS-1350DN FS-1350DN Operation Guide (Basic) - Page 74
Cancel], MENU], Memory Card Using the memory card, Advanced Operation Guide - missing developer unit
View all Kyocera FS-1350DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Message Format error Memory card KPDL error ## Press GO Load Cassette # (A4)/(PLAIN) Load MP Tray (A4)/(PLAIN) Low security Corrective Action The CF card inserted in the printer is not formatted, and therefore cannot be read or written. To format a CF card, follow the procedure in Memory Card (Using the memory card) section in the Advanced Operation Guide. Current print processing cannot continue because of occurrence of KPDL error which is categorized by ##. To print out an error report, display >>Error Report from the menu system, and select On. Press [GO] to resume printing. You can abandon printing by pressing [Cancel]. If Auto Error Clear is set to On, printing will be automatically resumed after a preset period of time. The paper cassette matching the paper size and paper type of the print job is empty. Load paper into the paper cassette as displayed in place of #. Press [GO] to resume printing. If you want to print from a different paper source, press U or V to display Use alternative? and you can change the source for paper feeding. After selecting a paper source and pressing [MENU], Paper Settings > appears. By pressing the U, the paper type settings menu appears. After setting the correct paper type, press [OK] and printing starts. There is no paper cassette installed in the printer that matches the paper size and paper type of the print job. Set paper in the MP tray. Press [GO] to resume printing. (Note that feeding the paper having a paper size which does not match the current paper size from the MP tray can cause paper jam.) If you want to print from a different paper source, press U or V to display Use alternative? and you can change the source for paper feeding. After selecting a paper source and pressing [MENU], Paper Settings > appears. By pressing the U, the paper type settings menu appears. After setting the correct paper type, press [OK] and printing starts. This message is displayed when Low was selected in Security Level. Memory overflow Press GO MemoryCard err## Press GO MemoryCard err20 The total amount of data received by the printer exceeds the printer's internal memory. Try adding more memory. Press [GO] to resume printing. You can abandon printing by pressing [Cancel]. If Auto Error Clear is set to On, printing will be automatically resumed after a preset period of time. A CompactFlash (CF) card error has occurred. Look at the error code given in place of ## and refer to CompactFlash (CF) Card and USB Flash Memory Errors on page 5-8. To ignore the CF card error, press [GO]. The CompactFlash (CF) card is accidentally inserted and removed from the printer's slot during the printer is on. Turn the power switch off and then back on again. Missing developer unit No multi copies Press GO Original toner installed Paper jam The developer unit is either not installed or incorrectly inserted. Insert the developer unit securely. Multiple copies cannot be printed because the RAM disk is disabled or the hard disk is not installed. There is no available RAM disk or hard disk space. Delete unnecessary files. Press [GO] to print error report. Displayed when the installed toner is the original Kyocera product. A paper jam has occurred. The location of the paper jam is indicated in place of the #'s. For details, refer to Clearing Paper Jams on page 5-10. 5-6 Troubleshooting