Kyocera FS-1350DN FS-1350DN Printer Driver User's Guide Version 11.0
Kyocera FS-1350DN Manual
View all Kyocera FS-1350DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera FS-1350DN manual content summary:
- Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 1
- Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 2
are used for Microsoft Windows Vista, Windows Server 2008 and Windows 2000 environments. User Interface screen captures shown in this guide may differ depending on your printing device. Model supported by the KX printer driver FS-1350DN Copyright © 2009 KYOCERA MITA Corporation All rights reserved - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 3
Windows XP with a Network Connection 1-5 Optional Printer Components ...1-6 Installing Optional Printer Components 1-6 The Add Printer Wizard ...1-7 Installing on Windows XP and Windows 2000 1-7 Installing on Windows Vista ...1-7 Printer Driver Settings Access ...1-8 Changing the Default Driver - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 4
Kyocera Logo ...4-5 Displaying Version Information 4-5 Displaying Plug-in Information 4-5 Chapter 5 Layout Booklet ...5-1 Printing a Booklet ...5-1 Multiple Pages per Sheet ...5-2 Printing Multiple Pages per Graphics Settings ...6-3 Pattern Scaling ...6-4 Inversion Settings ...6-4 ii User Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 5
Page Insert ...7-5 Printing Page Inserts ...7-5 Page 10 Selecting EMF Spooling ...8-10 Enabling Client Profile ...8-11 Chapter 9 Profiles Saving a Profile ...9-1 Editing a Profile ...9-2 Deleting a Profile ...9-2 Importing a Profile ...9-2 Exporting a Profile ...9-3 Glossary ...iv KX DRIVER - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 6
Vista, Windows XP, and Windows 2000, you must be logged in with administrator rights to install the printer driver. If you connect a USB (Universal Serial Bus) cable before printer driver installation, it is strongly recommended that you cancel the Found New Hardware Wizard and install the software - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 7
and specify the port. Installing in Windows Vista and Windows XP This section describes the express installation procedure of the driver software in Windows Vista and Windows XP. 1 Ensure that your printer and computer are turned on and connected by USB or network cable. Note: If the Found New - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 8
printer as the default printer. Make your selections, and then click Next. 7 On the Confirm Settings page, click Install if the settings are correct. Click Back to correct the settings. 8 The Installation Completed page appears displaying the following driver options. Print a test page Windows - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 9
page, you can assign a name for the printing system. This name appears in Windows Printers and Faxes and in the Print dialog box in applications. You can also choose to share this printer with others or set this printer as the default printer. Make your selections, and then click Next. KX DRIVER - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 10
on Windows Vista and Windows XP with a Network Connection This section describes the custom installation procedure of the driver software on Windows Vista and Windows XP using a Network connection. 1 Ensure that your printer and computer are connected to a network. 2 On the Installation Method page - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 11
Custom Installation page, select the driver and software packages you want to install from the Driver and Utility tabs, and clear those not intended for installation. Click Next. 7 On the Printer Settings page, you can assign a name for the printing system. This name appears in Windows Printers and - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 12
started by clicking Add printer in the File menu of the Printers and Faxes window. 4 The Add Printer Wizard appears. The wizard provides you with step by step driver installation instructions. Follow the instructions on each page, and then click Next to proceed to the next page. Note: If the Found - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 13
either Add a local printer or Add a network, wireless or Bluetooth printer. Follow the instructions on each page, then click Next to proceed to the next page. Note: If the Windows Security warning dialog box appears, click Install this driver software anyway. 6 The last page of the wizard appears - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 14
features can be used with the printer driver. You can also match the memory setting in the driver with the memory installed in your printing system, which lets the driver manage font downloads more efficiently. Administrator, User, PDL (Page Description Language), and Compatibility settings can - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 15
keep the printer driver consistent with the printing system configuration. Not all installed devices are detected by using Auto Configure. Before selecting OK in the Device Settings tab, check the settings to make sure that they are correct. Note: The default setting for Windows XP Service Pack 2 is - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 16
To maximize the downloading of printing system fonts, the driver must be set to match the total printing system memory. Setting the Memory By default, the Memory setting matches the standard memory in the printing system. If optional memory is installed, set the memory in the printer driver to match - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 17
Quick Print tab as default opens to this tab Password 1 In the Device Settings tab, click Administrator. 2 In the Enter Password dialog box, type the password and click OK. 3 In the Administrator Settings dialog box, clear the Password protect administrator settings check box. 4 Click OK. KX DRIVER - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 18
network devices, such as printing systems. SNMP settings determine the level of security when using the Auto Configure feature, and prevent unauthorized printing to the SNMPv3 printing system. SNMP settings must be set in the printer driver password Load Balancing Protocol (GLBP)-spoofing software. - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 19
User name up to 32 characters, and a Password from 8 to 32 characters. 3 To set authentication the default unit of measure, and change the driver display Units You can set Inches or Millimeters as the unit of measurement. This is used for the following settings: Custom page size setting in the Page - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 20
page. In the Device Settings tab, you can choose from PCL XL, (Printer Command Language XL), PCL 5e, KPDL (an emulation of PostScript printing), or PDF (Portable Document Format). The printer default is PCL XL, which is suitable for most printing purposes. If the XPS driver is installed, then XPS - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 21
KX DRIVER Device Settings Complex graphics might not print as well KPDL KPDL is used when printing from applications that support PostScript 2 or 3. An emulation of PostScript printing Strong graphics reproduction Print speeds may be slower than PCL 5e Requires more printing system memory than PCL - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 22
and printed with Adobe® Reader® on Windows, Mac OS®, and UNIX® platforms. For a document using mixed paper sizes, all pages in the PDF use the size of the first page. Note: With PDF selected as the Page description language, only a limited set of driver options are available. PDF Options You can - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 23
KX DRIVER Device Settings Type a User password. The user password must be entered at the time the PDF document is opened. This password must be different from the owner password click Control Panel and double-click Printers (Windows Vista), or Printers and Faxes (Windows XP). 2 Right-click on the - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 24
a PDL and a document format, XPS requires compatible printer hardware and software written for the Windows Presentation Foundation (WPF) architecture. PCL and KPDL are not compatible with an XPS environment. Therefore, an XPS driver supports a single PDL setting. The XPS driver can be installed from - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 25
Settings to the default by clicking Reset. Combine Source and Media Type Lists You can change the driver's Basic tab so that Media type and Source are combined into one list, labeled Source. In the combined list, Media types are listed first, followed by cassettes and MP tray. Creating a Combined - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 26
a group, called a profile, and applied to any print job. Profiles support common printing tasks. The Administrator can set the view of the Quick Print formats. If needed, check Rotated to change the orientation of the printed page by 180 degrees. EcoPrint This icon changes the text and graphics to - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 27
of paper for the purpose of reviewing the document and conserving paper. The readability of the multiple pages decreases as the number of pages per sheet is increased. You can set the arrangement of the pages from the Layout tab as well as print borders around each of the pages. KX DRIVER 3-2 - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 28
Default profile that returns the driver options to their default settings. The profiles can include Common Profiles, which are installed as optional components through the Printer driver, then save the driver all your driver settings. 2 printer driver to default settings, select the Factory Default - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 29
to the current print job, or click OK to save the profile. Exporting a Profile The Export button lets you export a copy of a profile from your printer driver for use in other printer drivers. The Factory Default profile cannot be exported. 1 Click Profiles. KX DRIVER 3-4 - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 30
Quick Print 2 In the Select profile section, highlight the profile to be exported, and click Export. 3 The Export Profile dialog box appears. Name and save the profile. 4 Click OK to close the Profiles dialog box. 3-5 User Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 31
printer driver settings. Basic Paper Settings The Basic tab contains several settings for the most commonly used printing tasks. Print size This setting sets the size of the area that the printer to Unspecified. Destination This setting specifies which output tray is used for the print job output. - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 32
is selected, then the printer searches for another tray or cassette using the same media. Transparencies, labels, and envelopes must be supplied from the MP tray. Ensure the paper is properly loaded by following the instructions outlined in the printing system's Operation Guide. Note: Source and - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 33
, select the MP tray for the custom page size. Click OK to return to the Print dialog box. Click OK to start printing. Duplex Printing Duplex printing is printing on both sides of each page. Select Print on both sides to start duplex printing. If it is not selected, then the printer prints on only - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 34
system's memory. The remaining job copies are printed from the stored data. This avoids the extra processing involved in sending every copy from the computer to the printing system. With Collate selected, the driver prints the complete job set by set. With Collate cleared, it prints each page by - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 35
of the print job in the Copies box. The document page count must not exceed the printer tray capacity. 4 Click OK to return to the Print dialog box, and click OK to begin printing. Kyocera Logo The Kyocera logo appears at the bottom of every driver tab. Click the logo to open the About dialog box - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 36
be folded into a 5.5 x 8.5 inch-size booklet. When Booklet is selected, other options such as Multiple pages per sheet, Poster, and Scaling are unavailable. A different paper source can be selected for the booklet cover. To include This selection prints text that reads from right to left. User Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 37
size. Note: The Sheets per page displays the unit of measurement in inches or millimeters. To change the Units setting, open the Printers and Faxes folder, right-click your printer. Click Properties > Device (0.0 and 30.4 mm). This option reduces the final poster size slightly. KX DRIVER 5-2 - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 38
a proof sheet, along with the poster, to guide you in assembling the printed poster sheets. Poster pages This selection prints all of the sheets to be 2 In Sheets per page, select the poster size. Each option describes the number of sheets it takes to represent one finished poster page. 3 Click - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 39
width of the page. A lower percentage reduces the page and a higher percentage enlarges the page. 3 Click the page. Short edge (top) This selection modifies the outside margin on the top-edge of the page. from the edge of the page. If text does not extend beyond the page when the gutter increases, - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 40
is a measurement, in dots per linear inch (dpi), that describes quality depends on the number of resolutions supported by the printing system. High quality, without EcoPrint results in a default setting to the highest printing or 300 dpi. Kyocera image refinement smoothes the edges of text and vector - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 41
KX DRIVER Imaging Selecting EcoPrint EcoPrint changes toner saturation in the printed job, making the entire print image, including text and graphics, appear lighter. The amount of toner on Microsoft Windows. System fonts printing system memory. Font the print job: Download as outlines This method - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 42
Download as bitmaps Downloading font with the desired font. Note: GDI compatible mode does not support Substitute with device fonts. Selecting Font Settings 1 Click Fonts to fonts are normally visible in the application font lists as printer icons next to the font name, unless there are Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 43
KX DRIVER Imaging Pattern Scaling Graphics settings dialog box and access the Pattern scaling settings. Auto (default setting) This setting prints patterns and fills to match the on areas of the image. Mirror print This setting prints the page content backwards, as it would appear in a mirror image. - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 44
the XPS driver on the Windows Vista default screens check box. 3 Set the available options to the desired values: Ink Lists the halftone screens available. For black and white printers, this option appears unavailable and is permanently set to Black. Frequency Displays the number of rows of dots per - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 45
brightest setting is +100; the darkest is -100. Zero is the default mid-level setting. Adjusting brightness is useful when graphic images are printing contrast setting is +100; the lowest is -100. Zero is the default mid-level setting. Adjusting contrast is useful if graphic images are printing too - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 46
. In black and white printers, it increases the detail for light-colored text printed. White text and image colors are unaffected. Print graphics as black This option prints all color graphics and text with black, rather than grayscale. This feature is intended for CAD applications. 6-7 User Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 47
Print tab in order to print using the Front inside or Back outside options. Although Cover mode and Page insert may be used simultaneously, they cannot be used with Transparency interleaving. Printing Covers 1 In the Publishing what type of paper or other media to use for the covers. KX DRIVER 7-1 - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 48
the inside surface of the front cover. Front Front outside Front inside 7-2 Prints on the outside and inside surfaces of the front cover. - continued User Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 49
and back Front inside Prints on the inside surface of the front cover and inserts a blank back cover. Front and back Front outside Front inside KX DRIVER Prints on both sides of the front cover and inserts a blank back cover. - continued 7-3 - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 50
outside Prints on both sides of the back cover and inserts a blank front cover. Prints on both sides of the front and back covers. 7-4 User Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 51
corresponding to your desired page arrangement. 3 To print on both the front and back of the inserted page, select the Print onto front and Print onto back check boxes. Page Insertion Options Check Box Selection Page insert Page Insertion Type Inserts a blank page. KX DRIVER - continued 7-5 - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 52
transparencies clean and prevents them from clinging together. This feature is only available when printing on transparencies supplied from the MP tray. You can print the same content on the backing pages , in the Source list select Auto (Transparency). 2 Click the Publishing tab. 7-6 User Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 53
transparency content on the inserted pages as well, select the Print loaded is automatically selected. 5 Click OK to begin printing. The printing system's operation panel prompts you to load transparencies into the MP tray, and, if necessary, load backing paper into the selected cassette. KX DRIVER - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 54
printer resident PRESCRIBE language. The Product Library CD includes a PRESCRIBE command language reference guide. A command file is a set of instructions to a print job. To create this file, use a text editor like Windows Notepad. In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 55
KX DRIVER Advanced 2 Make your changes to the file. 3 Save the file, and exit Microsoft Notepad. Note: Editing and saving a command file overwrites the contents of the existing local or network page and End of the page insertion point options are available only when PCL 5e is selected as the Page - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 56
page 2. If you type 1, 3, 5-12 the command file is inserted into page 1, page 3, and pages 5 through 12. If the Pages shows how the watermark appears on a page. This is useful for making adjustments to the limited number of options can be changed for default watermarks. 1 In the Advanced tab, click - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 57
KX DRIVER Advanced one of the following options. Diagonal [default] This option places the watermark text at the default angle on the page. User defined This option lets you type hold as you drag the pointer to move the watermark image. 10 The Rotate around center check box at the bottom far right of - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 58
memory is attempted, the process is stopped and an error message appears on the printer's operation panel. The Optional Printer Components wizard offers the opportunity to install the Security Watermark plug-in following installation of the printer driver to 600 dpi. Kyocera Image Refinement in the - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 59
editing a default security watermark. Select from the following options: None This option leaves the line blank. User defined This option inserts your text up to 39 characters. All other options display date, time, or other job information that is obtained from the computer or printer driver when - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 60
a default or custom security watermark to print. 3 Under Page selection, choose pages for printing the security watermark: All pages This option prints the security watermark on each document page. First page only This option prints the security watermark on the first document page. User Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 61
pages after the first page. Only on specified pages This option prints the security watermark on the page Settings dialog box, type a 4-16 character password, and type again to confirm. 4 In of the window during printing. You can start a status monitor for each supported printing KX DRIVER 8-8 - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 62
printer port. 5 To display a list of options, right-click the Status Monitor icon in the system tray browser to display a printer web page. Note: If your printer is connected with a to the Kyocera Mita home page. Exit the Status Monitor icon in the system tray. 2 Click Preferences. 3 Click the - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 63
in printing by the Microsoft Windows operating system. When a print job is sent from an application, it is transferred to the spool file. The application writes to and the printer driver reads from the spool file Allow data passthrough is selected in the KPDL Settings dialog box. KX DRIVER 8-10 - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 64
) in a client-server environment. Clear the Enable client profile check box to select profiles from the server to apply to print jobs created by the driver. Server profiles are read-only. Select the Enable client profile check box for using custom profiles locally in the - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 65
printer driver settings as a profile. You can select multiple options in the Quick Print tab and Printing Preferences, save them to a profile, and use all of them at once when you apply the profile. A maximum of 26 profiles can be established in one driver, including the Factory Default your driver - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 66
. Note: To reset the printer driver to default settings, select the Factory Default profile, and click Apply. driver. Select Yes, to import the profile, or No, to cancel the import. 3 If you selected Yes in the previous step, the newly imported file appears in the Profile dialog box. 9-2 User Guide - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 67
printer drivers. The Factory Default profile cannot be exported. 1 Click Profiles. 2 In the Select profile section, highlight the profile to be exported, and click Export. 3 The Export Profile dialog box appears. Name and save the profile. 4 Click OK to close the Profiles dialog box. KX DRIVER - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 68
in a booklet format by using a duplex unit. Two pages are printed on each side of a sheet to create a document that can be read like a book. C Cassette A removable plastic tray that holds a supply of paper for input to the printer. D dpi Dots per (linear) inch. Measurement that describes the - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 69
and feeders. MP tray Source tray used for labels, transparencies, envelopes, and custom printing media. Multiple pages per sheet This feature lets you print several pages on a single sheet of paper for the purpose of reviewing the document and conserving paper. Optional Printer Components Optional - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 70
printing system memory. RAM disk is temporary. All data sent to RAM disk memory will be when the printed page is photocopied. Network Management Protocol. The standard TCP/IP protocol for managing IP network corner of the window during printing. helps keep transparencies clean and prevents them - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 71
The Netherlands Telephone: +31.20.654.0000 Home page: http://www.kyoceramita-europe.com Email: [email protected] Kyocera Mita Nederland B.V. Beechavenue 25, 1119RA Schiphol-Rijk The Netherlands Telephone: +31.20.58.77.200 Kyocera Mita (UK) LTD 8 Beacontree Plaza Gillette Way Reading Berks - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 72
ku Osaka 540-8585, Japan Telephone: (06) 6764-3555 http://www.kyoceramita.com Kyocera Mita Australia Pty, LTD. Level 3, 6-10 Talavera Road, North Ryde, N.S.W. 2113 Australia Telephone: (02) 9888.9999 Kyocera Mita New Zealand LTD. 1-3 Parkhead Place, Albany P.O. BOX 302 125 NHPC Auckland, New Zealand - Kyocera FS-1350DN | FS-1350DN Printer Driver User's Guide Version 11.0 - Page 73
Rev. 11.0_090818