Kyocera FS-1370DN FS-1370DN Operation Guide (Basic) - Page 36
Connections, Connecting the USB Cable
UPC - 632983018170
View all Kyocera FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Connections This section explains how to start up the printer. Connecting the USB Cable Follow the steps as below for connecting the USB cable. 1 Connect the USB cable to the USB Interface Connector. Note Use a USB cable with a rectangular Type A plug and a square Type B plug. This cable is sold separately. 2 Connect the other end of the USB cable to the computer's USB interface connector. Connecting the Network Cable Follow the steps as below for connecting the network cable. 1 Remove the cap attached to the printer. 2 Connect the printer to the PC or your network device. Note Use shielded interface cables. These cables are sold separately. 3-2 Connecting and Printing
3-2
Connecting and Printing
Connections
This section explains how to start up the printer.
Connecting the USB Cable
Follow the steps as below for connecting the USB cable.
1
Connect the USB cable to the USB Interface Connector.
2
Connect the other end of the USB cable to the computer's USB
interface connector.
Connecting the Network Cable
Follow the steps as below for connecting the network cable.
1
Remove the cap attached to the printer.
2
Connect the printer to the PC or your network device.
Note
Use a USB cable with a rectangular Type A plug and a
square Type B plug. This cable is sold separately.
Note
Use shielded interface cables. These cables are sold
separately.