Kyocera FS-1370DN PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 335
R! CMNT Size the as Monarch; SPSZ 1, size-code, enlargement/reduction, ratio
UPC - 632983018170
View all Kyocera FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
SPSZ Function The SPSZ command sets the paper edge limits to the dimensions of a standard paper size, allowing for a 5 mm border of all sides. The margins are set to the edge limits. This command is particularly useful for printing on envelopes (size-code 1 through 4, 16, and 17). If size-code is 0, the printing system adjusts the edge limits to match the cassette size. size-code defaults to 0 at power-up and after a reset. Size codes 10 through 12, 19, and 30 are supported only by the printing system model that handles the A3 size paper. Support for other paper sizes and reduction ratios vary depending on models. For details, see the user's manual supplied with the printing system. If your printing system model supports the A3 size paper, the enlargement/reduction ratio parameter controls reduction and enlargement of printing a page sized by the sizecode parameter. Although the enlargement/reduction ratio parameter is optional, an enlargement/reduction ratio setting remains effective until an SPSZ command with new enlargement/reduction ratio specified or a reset command is encountered. Note that the enlargement/reduction ratio parameter is ignored unless the source paper size and the cassette paper size does not match. The SPSZ command causes a page break, so it should be placed at the top of a file or program, or at the beginning of a new page. Files !R! CMNT Size the page as Monarch; SPSZ 1; EXIT; !R! CMNT Size the page as A3 and reduce it to A4; SPSZ 10, 5; EXIT; !R! CMNT Size the page as letter and reduce it to 98%; SPSZ 6, 9; EXIT; 325