Kyocera FS-1370DN PRESCRIBE Commands Technical Reference Manual - Rev. 4.7 - Page 217
OS [Output Status], OT [Output carousel Type], Bit Position, Bit Value, Description
UPC - 632983018170
View all Kyocera FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
HP 7550A Emulation [KC-GL] (Mode 8) OS [Output Status] This instruction returns an integer from 0 to 255 giving one byte of status information, as follows: status TERM The following table describes the individual bits in the status byte. After powered up or an IN instruction, bit positions 3 and 4 turn on making the bit value to be 24. Bit position 3 is cleared subsequently after delivering the status. Bit Position Bit Value Description 0 1 The pen is down. 1 2 P1 or P2 has been changed. This bit is cleared when actual P1 and P2 values are read via the RS-232C interface, or when the IN instruction is executed. 2 4 A digitized point is ready for output. This bit is cleared when the point is output via the RS-232C interface, or when the IN instruc- tion is executed. 3 8 Initialized. This bit is cleared when a status byte is output via the RS-232C interface, or when the IN instruction is executed. 4 16 Ready to receive next data. 5 32 Error. This bit is cleared when an error number is output via the RS- 232C interface, or when the IN instruction is executed. 6 64 SRQ was set. 7 128 (Reserved) OT [Output carousel Type] This instruction delivers information on the current carousel type and stall occupancy. This may be used to determine those information in a remote location. OT TERM Response: type, map TERM The current carousel type and its pen map are delivered as 2 ASCII integers, each separated by comma. The type field can contain the values -1 through 4, which have the following values: Bit value when stall is occupied Pen stall 1 1 2 2 4 3 8 4 16 5 32 6 64 7 128 8 7-105