Kyocera FS-1800N KX Driver Operation Guide Rev. 1.3.1 - Page 122
Virtual Mail Box VMB, Cancel, RAM Disk, Settings, Printing Virtual Mailbox Job Lists
View all Kyocera FS-1800N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
5 Select Virtual Mail Box VMB and click Selection... . If Virtual Mail Box VMB is inactive, no virtual mailboxes have been created yet. Click Cancel in the screen above, and create a virtual mailbox while referring to RAM Disk Settings on page 33. 6 The Virtual Mailbox Selection dialog box appears. Select the mailboxes for saving the job, and click OK. 7 Close the Properties dialog box. The job is saved to the virtual mailbox on the hard disk and held for printing. • Printing the list -- Refer to the next section, Printing Virtual Mailbox Job Lists, below. • Printing saved jobs -- Refer to Printing Jobs in Virtual Mailboxes on page 119. Printing Virtual Mailbox Job Lists Follow these steps to print the jobs lists of virtual mailboxes. You can print a list if there is at least one job saved in the virtual mailbox. The list is printed from the printer operator panel. 1 On the printer operator panel, press the MENU key. 2 Press the S or Tkey repeatedly until e-MPS> is displayed. 3 Press the X key to access the submenu. 4 Press the S or T key repeatedly until >List of VMB appears. This menu is not displayed if all virtual mailboxes are empty. 5 Press the ENTER key. A blinking question mark [ ? ] appears. 6 Press the ENTER key again. The list will be printed. 118