Kyocera FS 1920 Kyocera Extended Driver 3.x User Guide Rev-1.4 - Page 76
Print Text as Black, Print Graphics as Black
View all Kyocera FS 1920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
4. Determine the Options settings. Refer to the options and descriptions below. Options Print Text as Black Print Graphics as Black (monochrome printers only) Reverse Image Mirror Print Halftone Screen (monochrome printers only) Descriptions Prints color and gray characters in black. There is no effect on white text, color images, or graphics. Prints colored graphics or text in black, without using grayscales. There is no effect on images or photographs (*.bmp, *.jpg, *.psd, *.tiff). This function is enabled in CAD applications only. Outputs a reversed black and white negative effect. Prints a mirror image of the page, with right and left reversed. Produces a mirror-like effect. By disabling GDI compatible mode check box in the PDL Settings, you can enable the halftone screen settings. You can adjust the dithering process by changing the number of dot lines, angle, and dot shapes. Images are divided into dots. As the number of the dot lines increases and the interval between the dots grows smaller, the image is printed more distinctly. As the number is reduced and the interval between the dots is increased the image is printed more coarsely. For further details, refer to the next item, Half Tone Screen Settings on page 71. 5. Click OK to save your settings. 70