Kyocera FS 3830N FS-3820N/3830N Operation Guide Rev-1.1 - Page 119
Resource Protection, Others, >Resource Prot.
View all Kyocera FS 3830N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Configuration Resource Protection When you switch from the PCL 6 emulation to another, all downloaded fonts and macros are lost. Resource protection preserves these PCL resources in memory so that they are intact when you change the emulation back to PCL 6. Resource protection requires extra memory to store the downloaded fonts and macros. The total size of the printer memory recommended for Note using the resource protection option is affected by several factors. See Appendix A. 1 Press the MENU key. 2 Press the or key repeatedly until Others > appears. Others > 3 Press the > key. 4 Press the or key repeatedly until >Resource Prot. appears. >Resource Prot. Off 5 Press the ENTER key. A blinking question mark (?) appears. >Resource Prot. ? Off 6 Press the or key to display the desired mode. The display changes as shown below. Off (default) Permanent Perm / Temp 7 When the desired mode is displayed, press the ENTER key. 8 Press the MENU key. The message display returns to Ready. 1-103