Kyocera FS-4020DN FS-2020D/3920DN/4020DN KX Driver User Guide Rev 10.8 - Page 18
Enabling Auto Configuration, Memory, Setting the Memory
View all Kyocera FS-4020DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Device Settings Memory Not all installed devices are detected by using Auto Configure. Before selecting OK in the Device Settings tab, check the settings to make sure that they are correct. Note: The default setting for Windows XP Service Pack 2 is for the Windows Firewall to be set to On. The setting can be changed to allow communication between the printing system and your computer. In the Windows Security Alert dialog box, click Unblock. Silent Auto Configure Silent Auto Configure checks the printing system every 10 minutes for changes in optional devices or memory. When a change is detected, the driver is automatically updated with the new settings. Silent Auto Configure is only available for printing systems installed on Windows Vista OS. In a client/server environment, this feature is unavailable to a client logged in as a restricted user. Enabling Auto Configuration The Auto Configure button can be used to detect all available device options when the printing system is connected to a network through a TCP/IP port. 1 Verify that all optional devices are attached to the printing system, and that it is turned on and ready to print. 2 In the Device Settings tab, click Auto Configure. In Windows 2000 and Windows XP, the driver settings are updated immediately. In Windows Vista, the Auto Configure dialog box opens. Select from Auto configure options: Auto Configure Now Click the button at any time to retrieve the current settings from the printing system. It is recommended to do this when the driver is first installed and when Silent auto configuration is turned off. Silent auto configuration Select to let the driver check the printing system every 10 minutes for any changes in optional devices or memory. When a change is detected, the driver is automatically updated with the new settings. Memory is the amount of standard and optional memory installed in the printing system. To maximize the downloading of printing system fonts, the driver must be set to match the total printing system memory. Setting the Memory By default, the Memory setting matches the standard memory in the printing system. If optional memory is installed, set the memory in the printer driver to match the total amount of memory. 1 Install optional DIMM memory in the printing system. 2-3 User Guide