Kyocera FS-8000CDN KX Driver Operation Guide Rev. 1.3.1 - Page 95
Offset, Print, Using the Offset, Properties, Properties dialog box appears, Output, Output direction
View all Kyocera FS-8000CDN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Using Optional Equipment document is printed that has a total of 58 pages, the print job will be split into two separate stapled sets of 50 and 8 pages. Offset 5 Click OK to return to the Print dialog box, and click OK to start printing. 6 The final printed document is stapled by the finisher and delivered to the output tray. For further details about stapler specifications, refer to your supplied finisher Operation Guide. The Offset stacks each printed document by shifting from right to left as it is delivered to the output tray. Output direction Offset is available on printers with a supported finisher (optional) installed. After installation, optional equipment must be recognized by the printer driver (device settings). For further details, refer to Installing Optional Devices on page 30. Offset and Staple cannot be used simultaneously. NOTE Using the Offset 1 From the application's Print dialog box, specify the number of copies of the document to be printed. 2 Click Properties in the Print dialog box. The Properties dialog box appears. 3 Click the Output tab in the Properties dialog box. 91