Kyocera FS 820 PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 346

PRESCRIBE Command Reference STAT - STATus Format STAT [mode]; Parameter mode: 0 = prints a user status page (default) 1 = prints a service person status page Function The STAT command instructs the printing system to print a page of status information, starting on a new page. The status page lists the software version and release date as well as the following information: • The current unit (inches, centimeters, points, or dots; not available in KPDL mode) • The current page orientation, font, and country code (not available in KPDL mode) • Current margins, line spacing, character spacing, and graphics line width, as measured in the current unit (not available in KPDL mode) • Current memory allocations The above status settings are temporary conditions set by PRESCRIBE commands. They revert to their default values when power is switched off. Other status page information includes: • Miscellaneous status: a list of options stored in permanent memory. See Chapter 6 of the Technical Reference manual for the definitions of the option values. These values do not change when power is switched off. Only the FRPO command can alter them. • Service information to inform a service person. • Nonresident fonts in memory: Fonts generated by the LDFC command, downloadable soft fonts from software or read from a memory card. Font size and numbers appear alongside the font name. These fonts are lost when power is switched off. Items and values on the status page may vary among the printing system's firmware versions. Note Depending on the parameters, different information may be printed on the status page. (There are two types of status pages: one intended for the end user, and one intended for service personnel.) Also, the printing system can print the status page in different languages in accordance with the language setting of the printing system's control panel. The default is the English status page. 336