Kyocera FS 920 FS-820/920 Operation Guide - Page 37
Maintenance, OPERATION GUIDE, Registration Roller, Transfer Roller, Charger Cleaner, Drum Unit
![]() |
View all Kyocera FS 920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5 Use a clean, lint free cloth to clean dust and dirt away from the metal Registration Roller (metal) c. d IMPORTANT: Take care not to touch the Transfer Roller (black) d during cleaning. 6 Slide the Charger Cleaner (green) back and forth 2 or 3 times to clean the charger wire, then return it to its original position. Maintenance c 7 When cleaning is complete, return the Drum Unit to its position, aligning the guides at both ends with the slots in the printer. 8 Insert the Developer Unit together with the Toner Container, back into the machine. Close the Top Cover. OPERATION GUIDE 21
![](/manual_guide/products/kyocera-fs-820-fs820920-operation-guide-9320dbb/37.png)
Maintenance
OPERATION GUIDE
21
5
Use a clean, lint free cloth to clean
dust and dirt away from the metal
Registration Roller
(metal)
.
IMPORTANT:
Take care not to
touch the
Transfer Roller
(black)
during cleaning.
6
Slide the
Charger Cleaner
(green)
back and forth 2 or 3 times to
clean the charger wire, then return
it to its original position.
7
When cleaning is complete, return
the
Drum Unit
to its position,
aligning the guides at both ends
with the slots in the printer.
8
Insert the
Developer Unit
together
with the
Toner Container
, back
into the machine.
Close the
Top Cover
.