Kyocera FS 9520DN PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 22
ACLI, Format, Parameters, Function
View all Kyocera FS 9520DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
PRESCRIBE Command Reference ACLI - Add CoLor by Index COLOR Format ACLI index, color1, color2, color3; Parameters index: integer from 1 to 255 color1: value for red, integer from 0 to 255, in RGB color space value for lightness, number from 0.0 to 100.0, in L*a*b color space color2: value for green, integer from 0 to 255, in RGB color space value for red/green, number from 0.0 to 100.0, in L*a*b color space color3: value for blue, integer from 0 to 255, in RGB color space value for yellow/blue, number from 0.0 to 100.0, in L*a*b color space Function The ACLI command adds a color to the currently active palette. This command is ignored when the currently active palette is a simple color palette or the Pantone color palette. If an index number larger than the palette size is given, this command is also ignored. If a color is added to the existing index number, the current color for that index number is automatically replaced with the new color. To add a color in a palette, the following guidelines must be used depending on the color space used: For RGB color space, specify the values for red, green, and blue with an integer from 0 to 255, where 0 = 0% and 255 = 100%. Any value outside this range is rounded to the minimum or maximum value, namely 0 or 255. A fractional value beyond the decimal point is discarded. For L*a*b color space, specify relative values for the lightness, red/green, and yellow/ blue with a number from 0.0 to 100.0. Any value outside this range is rounded to the minimum or maximum value, namely 0.0 or 100.0. 12