Kyocera FS-C5016N FS-C5016N Quick Reference Guide - Page 14

Message Corrective Action Print overrun Press GO†† The print job transferred to the printer was too complex to print on a page. Press the GO key to resume printing. (The page may break in some pages.). You can abandon printing by the CANCEL key. If Auto Continue is set to On, printing will be automatically resumed after a preset period of time. For details on Auto Continue, refer to chapter 3 of the Operation Guide. RAM disk error## Press GO A RAM disk error has occurred. Look at the error code given in place of ## and refer to chapter 4 of the Operation Guide. To ignore the RAM disk error, press the GO key. Replace toner C, M, Y, K Replace toner Clean printer Two message items are displayed alternately. Toner has run out in the toner container(s). Replace the toner container using a new toner kit for the particular color. The printer does not operate when this message is displayed. For example, if Replace toner C,K is displayed, replace the cyan and the black toner containers. Set paper Press GO The MP tray is out of paper. Load paper and press the GO key. (Note that feeding the paper having a paper size which does not match the current paper size from the MP tray can cause paper jam.) Toner low C, M, Y, K Replace the toner container using a new toner kit. Color of the toner container that needs to be replaced is represented by C (Cyan), M (Magenta), Y (Yellow), and K (Black). 12