Kyocera FS-C5016N Service Manual - Page 48
relay PWB KP, Defective LED print
UPC - 632983002629
View all Kyocera FS-C5016N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
FS-C5016N Code 0951 0952 Contents Causes Remarks Check procedures/corrective measures LED print head memory PWB 4 communication error (black drum unit) • The LED print head memory PWB 4 (KP-1040) which is attached to the LED print head 4 of the Black drum unit does not communicate with the engine controller PWB (KP-1054) normally. Defective LED print head memory PWB 4 (KP-1040). Defective engine controller PWB (KP-1054). Defective LED print heads relay PWB (KP-1048). Replace the LED print head 4 of black drum unit. See page 1-6-13. Replace the engine controller PWB (KP1054). See page 1-6-25. Replace the LED print heads relay PWB (KP-1048). See page 1-6-28. Defective harness (S02866) between engine controller PWB (KP-1054) and LED print heads relay PWB (KP-1048), or poor contact of the connector terminals. Check the continuity of the harness (S02866), check the insertion of YC3 of the engine controller PWB (KP-1054), if there is trouble, remedy or replace. Defective harness (S02866) between LED print head memory PWB 4 (KP-1040) and LED print heads relay PWB (KP1048), or poor contact of the connector terminals. Check the connection of the connector with the black drum unit and the printer main unit, check the continuity of the harness (S02866), check the connection of the LED print head memory PWB 4 (KP-1040), if there is trouble, remedy or replace. LED print head memory PWB 2 communication error (cyan drum unit) • The LED print head memory PWB 2 (KP-1040) which is attached to the LED print head 2 of the cyan drum unit does not communicate with the engine controller PWB (KP-1054) normally. Defective LED print head memory PWB 2 (KP-1040). Defective engine controller PWB (KP-1054). Defective LED print heads relay PWB (KP-1048). Replace the LED print head 2 of cyan drum unit. See page 1-6-13. Replace the engine controller PWB (KP1054). See page 1-6-25. Replace the LED print heads relay PWB (KP-1048). See page 1-6-28. Defective harness (S02866) between engine controller PWB (KP-1054) and LED print heads relay PWB (KP-1048), or poor contact of the connector terminals. Check the continuity of the harness (S02866), check the insertion of YC3 of the engine controller PWB (KP-1054), if there is trouble, remedy or replace. Defective harness (S02866) between LED print head memory PWB 2 (KP-1040) and LED print heads relay PWB (KP1048), or poor contact of the connector terminals. Check the connection of the connector with the cyan drum unit and the printer main unit, check the continuity of the harness (S02866), check the connection of the LED print head memory PWB 2 (KP-1040), if there is trouble, remedy or replace. 1-5-4