Kyocera KIP 7170 User Manual - Page 44
Dehumidifying Roll Media, HL
View all Kyocera KIP 7170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2. 9 Dehumidifying Roll Media If the roll paper is extremely humidified, it may cause several kinds of defective print. Defective prints you will experience most will be "crease of paper" and "loss of image". Normal Print Crease of paper If the media is humidified; Normal Print Loss of image If the media is humidified; If the KIP 7170 is installed in such a condition, it is recommended to use the optional embedded "Dehumidify Heater". Turn on the Dehumidify Heater if the room air has too much humidity (75% or higher) to prevent the above kinds of print defect. Such problems above may be resolved. NOTE KIP 7170 is equipped with the Dehumidify Heater (optional for the US) If needed, contact the service personnel for detail. To turn on the Dehumidify Heater, press the H side of the Dehumidify Heater Switch on the rear. (Press its L side to turn off.) H L 2-22 Chapter 2 Basic Operation