Kyocera KM-1500 1500 Operation Guide Rev 5 - Page 39
Off mode, More about the Off mode
![]() |
View all Kyocera KM-1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Off mode The Off mode automatically turns most of the power to the copier off if no operation has been performed on the copier for a pre-set period of time (between 1 and 240 minutes). "-" will be shown on the copy quantity/magnification display, but everything else on the operation panel will go out. The factory default setting is for 5 minutes. It is possible to engage the Off mode manually. Press down on the Reset/Power key for at least 3 seconds. The Off mode will engage immediately. Section 4 BASIC OPERATION More about the Off mode The Off mode is a power-saving feature which automatically turns most of the power to the copier off when a certain time elapses without any operation being performed. Copiers are generally in a standby mode more than they are in actual operation, so power consumption during this standby period occupies a large part of overall consumption. Having the copier enter the Off mode automatically after a certain amount of time reduces unnecessary power consumption during the standby period or at night if the copier happens to be left on accidentally. The result is a lower electricity bill. NOTES • It is possible to set the amount of time before the Off mode engages. (See "Off Mode Time" on page 6-4.) • It is also possible to disable the Off mode. (See "Off Mode ON/OFF" on page 6-4.) NOTE When the Off mode is engaged, all power to the copier, except that to the operation panel, is turned off. When the power switch is turned OFF ({), all power to the copier, including to the operation panel, is turned off. To enable copying again, press any one of the keys on the operation panel. 4-7
![](/manual_guide/products/kyocera-km1500-1500-operation-guide-rev-5-99ef737/39.png)