Kyocera KM-1650 KX Driver Operation Guide Rev. 1.3.1 - Page 96
Punch, Finisher Face-down, Offset, Finishing Options, Print, Using the Punch, Properties, Output
View all Kyocera KM-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
4 Set either Finisher (Face-down) or Finisher (Face-up) as the output destination, then enable the Offset check box in the Finishing Options section. Punch 5 Click OK to return to the Print dialog box, and click OK to start printing. After the first set is delivered, the second set will be delivered offset to the side. Then the printer delivers the third set in the same position as the first and the fourth set in the same position as the second. The Punch feature inserts holes in each printed page. The Punch feature is available on printers with supported optional finisher installed. After installing the printer driver, optional equipment must be selected in the driver in order to use the punch option (device settings). For further details, refer to Installing Optional Devices on page 30. Punch and Booklet Printing cannot be used simultaneously. NOTE Using the Punch 1 In the Properties dialog box, click the Output tab. 2 Select either Finisher (Face-down) or Finisher (Face-up) as Output destination. 92