Kyocera KM-2530 Printing System (N) Operation Guide (Setup Edition) - Page 105
Memory card settings, Inserting the Memory Card
View all Kyocera KM-2530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
4. Selecting the Printer Settings 4-10 Memory card settings Memory Card This machine comes equipped with a slot for inserting a Memory Card. Use a Memory Card that contains fonts in order to print with fonts other than those already installed in the machine, or use the card to save and then read print data. Inserting the Memory Card Insert the Memory Card into the slot with the front of the card facing the rear of the machine. IMPORTANT! BE SURE to turn the main switch OFF (O) BEFORE inserting or removing the Memory Card. About the memory card settings It is possible to perform memory card settings for the 11 items shown in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. Item 1 Writing data If "Write Data" is selected here, the machine will enter a "waiting for data" state until data is sent from the host computer. 2 Partition List print out Available settings Write Data List of Partitions 3 Format memory card If "Yes" is selected here, the memory card will be formatted. Format 4 Reading data Reads the selected data from the memory card. 5 Reading font data Reads all of the font data from the memory card. Select from among the data partition names that are displayed. Fonts Remarks Displayed only when the memory card has been inserted. Displayed only when the memory card has been inserted. Displayed only when the memory card has been inserted. (ALWAYS format the memory card using this printer. If you attempt to format it with another device, it may become unusable.) Displayed only when there is appropriate data in the memory card. Displayed only when there is appropriate font data in the memory card. 4-36