Kyocera KM-2550 1650/2050/2550 Operation Guide (Advanced) - Page 59
IP Address
View all Kyocera KM-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Printer Settings 7 Press the Enter key. DHCP This machine supports DHCP (Dynamic Host Configuration Protocol). When using DHCP, turn DHCP On. 1 Display the TCP/IP screen referring to steps 1 to 5 of TCP/IP setting. 2 Press the S key or the T key to select Change #. TCP/IP On Off Change # 3 Press the Enter key. 4 Press the S key or the T key to select DHCP. TCP/IP Setting Back DHCP IP Address 5 Press the Enter key. 6 Press the S key or the T key to select On. DHCP Back On Off 7 Press the Enter key. IP Address Register the IP address of this machine. Notes 1 2 • The IP address that should be registered here differs depending upon your network environment. Check with your network administrator before performing this setting. • If you use the following procedure to manually register the IP address, be sure to turn the DHCP setting Off and the TCP/IP setting On. Display the TCP/IP screen referring to steps 1 to 5 of TCP/IP setting. Press the S key or the T key to select Change #. TCP/IP On Off Change # 3 Press the Enter key. 4 Press the S key or the T key to select IP Address. TCP/IP Setting Back DHCP IP Address 5 Press the Enter key. 2-19