Kyocera KM-2550 Scan System (F) Operation Guide (Setup Edition) - Page 16
User registration, Date/Time and Time Difference - pin
View all Kyocera KM-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Set-up 8 In the same manner, set Subnet for subnet mask and Gateway for gateway addresses. Scan Default: IP Address : 10. 181. 15. 11 Subnet : 255. 255. 255. 0 Gateway : 10. 181. 13. 11 9 Once it is complete to enter all network addresses and returned to the Scanner setting screen of Step 7, use the S and T keys to move D to select End and then press the Enter key. Scan Default: End IP Address Subnet : 10. 181. 15. 11 : 255. 255.255. 0 Note In a network environment with RARP, select RARP and then select On on the Scanner setting screen. In this case, you will not need to set the IP address manually. 10 For other network settings, use a web browser or Address Editor. User registration To use the scanner, user registration is needed in addition to the network setting. User (transmitter) registration is performed from a web browser or Address Editor. For details, see the Online Manual . Date/Time and Time Difference Sets the required area information for the Send E-mail function. The time of day when email is sent from the scanner is included in the header of that email message as the transmission time. Perform the following procedure in order to set the date and time in your area, as well as the time difference to GMT (Greenwich Mean Time). 1 Press the System Menu/Counter key. 2 Use the S and T keys to move D to select Machine Default and press the Enter key. The password entry screen will appear. System Menu / Counter Job Accounting Copy Default Machine Default 3 Enter the password using the numeric keys. The password at the factory default setting is 1600 for the Enter Pin Code using # key. 16 ppm model, 2000 for the 20 ppm model and 2500 for the 25 ppm model. 4 Use the S and T keys to move D to select Date/Time and press the Enter key. Machine Default Low Power Time Key Sound On/Off Date/Time : 15Min. : On : 09:35 5 Use the S and T keys to move D to select the item to be changed and use the < and > keys to select the desired setting. Date/Time End Time DST : 09:35 : Off 2-4