Kyocera KM-3035 Printing System (U) Operation Guide (Functions Edition) - Page 16
Selecting the serial interface settings, Selecting the network interface
View all Kyocera KM-3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4. Selecting the Printer Settings G Selecting the serial interface settings 1 Select "Serial" tab. 2 Use the "L" and "M" cursor keys to select the desired item and then touch the "Change" key. The setting screen for the selected item will appear. Baud rate: Sets the Baud Rate 3. Data Bits: Sets the data bit length 4. Stop Bits: Sets the stop bit length 5. Parity: Sets the parity 6. Protocol: Sets the protocol 7. 3 Select the desired setting for each item and then touch the "Close" key. The display will return to the [Interface] screen. G Selecting the network interface 1 Select "Network" tab. 2 Use the "L" and "M" cursor keys to select the desired item and then touch the "Change" key. The setting screen for the selected item will appear. Netware: Turns NetWare On/Off 8 and selects the NetWare Frame type 9. TCP/IP: Turns TCP/IP On/Off 0, DHCP On/Off! and sets the IP address @, Subnet Mask # and the Gateway address $. Ether talk: Selects the Ether Talk setting %. Option Status Page: Selects the setting for the Network Card Status Page print out ^. 4-4