Kyocera KM-3050 3050/4050/5050 Operation Guide Rev-3 (Advanced) - Page 250

System Menu NOTE: If you select [Off] for Auto Sleep, the time display does not appear. Use the procedure below to set the Auto Sleep time. 1 Press the System Menu key. 2 Press [T], [Date/Timer] and then [Change] of Sleep Timer. 3 Press [+]/[-] or the numeric keys to enter the time until Auto Sleep is turned on. Date/Timer - Sleep Timer Set the amount of time to wait before automatic Sleep Mode. Use [-]/[+] or the numeric keys to enter a number. (1 - 240) min. Status 4 Press [OK]. Cancel OK 10/5/2006 10:10 Auto Error Clear If an error occurs during printing, the print job stops to wait for the next step to be taken by the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time elapses. The following errors are automatically cleared. Print overrun Memory is full Auto Error Clear ON/OFF Select whether to use Auto Error Clear or not. Use the procedure below to select the interface. 1 Press the System Menu key. 2 Press [T], [Date/Timer] and then [Change] of Auto Error Clear. 6-74 ADVANCED OPERATION GUIDE