Kyocera KM-5035 KX Driver Operation Guide Rev. 1.3.1 - Page 93
Using Optional Equipment, Staple, Using the Stapler
View all Kyocera KM-5035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 4 Using Optional Equipment This section describes useful functions of the printer driver. Staple The properties boxes described here may differ from those for your printer. NOTE The Staple feature is available on printers with an optional finisher installed. If a booklet stitcher unit is installed, the Booklet Printing feature is available. For further details, refer to Booklet Printing on page 102. After installation, optional equipment must be selected by the printer driver (device settings). For further details, refer to Installing Optional Devices on page 30. Printed documents can be stapled in the positions shown below. Upper Left Upper Right Booklet Staple and Offset features cannot be used simultaneously. NOTE Using the Stapler NOTE When the paper size is A4, B5, or Letter, the Orientation must be set to Rotated in order to staple the upper-right corner. For further details, see the explanation on page 50 in step 8 in the Basic Printing Tasks section. 89