Kyocera KM-5230 KX Driver Operation Guide Rev. 1.3.1 - Page 82
Adjusting Color, Color Mode
View all Kyocera KM-5230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Half Tone Screen Settings 1 Click Halftone Screen... on the Graphics Settings dialog box. The Halftone Screen Settings dialog box appears. 2 Clear the Use Printer's Default Screens check box. 3 Select from the list for each item, or enter values into the boxes to make settings. Refer to the options and descriptions listed below. Options Ink Frequency Angle Shape Use Accurate Screens Descriptions Determines the color used for the printed output. Set the number of lines and units for halftone dots. The units are lines/ cm or lines/inch. Enter a value in the Frequency box, and select the units from the list to the right. Determines the halftone dot angle. The setting can range from 0.0 to 180.0 degrees. Set the dot shape for halftones. Choose from: Ellipse, Round, and Line. Fine adjusts the set values to ensure an accurate number of lines and halftone angle. 4 Click OK to save the settings. Adjusting Color You can adjust attributes of text and graphics for your color printouts. Color Mode You can switch between printing in Color (CMYK) and Monochrome modes. Specifying Custom mode allows you to select the desired effects including Gray Component Replacement, Continuous Tone, Gloss Mode, and Monochrome. Refer to Color Mode Definitions table below. To adjust color settings: 1 From the Print dialog box of the application, access the printer Properties. Select Properties in the Print dialog box opened from the File menu. 2 In the Properties dialog box, click the Color tab. 78