Kyocera KM-7530 KM-NET Viewer Operation Guide Rev-5.2-2010.10 - Page 38
Permitting Jobs with Unknown IDs, Enabling Simple Login, LDAP over SSL - printer driver
View all Kyocera KM-7530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Device 3-18 3 If you want to get the network user property, click Obtain network user property. Only ASCII characters are allowed in the text boxes. 4 Type the server name in the LDAP server name text box. The maximum is 64 characters. 5 Select the LDAP port number from the list. Available port numbers range from 1 to 65535. 6 Select the Search timeout (seconds) from the list. Available numbers of seconds range from 5 to 255. 7 Select the LDAP encryption from the list. The LDAP encryption can be saved to LDAPv3/TLS, LDAP over SSL, or it can be set to Off. 8 The device uses the Acquisition of user information settings for search and retrieval of login user information from the LDAP server. Type a valid user name in the Name 1 text box. The maximum length is 32 characters. Type another valid user name in the Name 2 text box. The maximum length is 32 characters. Type a valid e-mail address in the E-mail Address text box. The maximum length is 32 characters. 9 You can proceed to the Permit jobs with unknown IDs check box, or you can click OK to save your settings and close the dialog box. Permitting Jobs with Unknown IDs If you want a device to have no user restrictions and accept print jobs without a user login and password, you can select the Permit jobs with unknown IDs check box. The default is for the check box to be cleared. 1 Select a device in the device list. In the menu bar at the top of the screen, click Device > Advanced > Authentication Settings. The Authentication Settings dialog box opens. 2 At the bottom of the dialog box select the Permit jobs with unknown IDs check box. Click OK to save all your settings. If you want to restrict the device with a user login, clear the Permit jobs with unknown IDs check box. In the printer driver for the device, you must also click Device Settings > Administrator, and select User login. Type the user name and password for a specific user, or choose to have the device prompt for the user name. Enabling Simple Login You can enable simple login for a printing system. 1 In any Device view, select a printing system. 2 Click Device > Advanced > Authentication Settings. If authentication is required, enter a login and password. 3 Select the Simple login check box. User Guide