Kyocera KM-C2525E KX Driver User Guide Version 5.90 - Page 45
Gutter, Staple - brochure
View all Kyocera KM-C2525E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Finishing The top two settings (e.g. A4/Letter) are for the smaller size paper in the mixed page document. The second row of settings (e.g. A3/Legal/Ledger) is for the larger size paper in the mixed page document. Select the one setting that best illustrates the edge of the mixed pages you want to align. Note that a change to one custom Finishing edge setting adjusts other selections to make them compatible with the change. Gutter Based on the page size and print size specified in the Basic tab, you can reduce or enlarge the image from 20% to 500% of the original size, or increase the top or left margin, before printing. Staple User Guide Click Gutter to increase the outside margins in a range from 5.0 to 25.4 mm (0.20 to 1.00 inch). The left and/or top margins can be adjusted. This is useful when you want to add extra margin space to the page for staples or hole punches. When used with duplex printing, the enlarged gutter lines up evenly on both sides of the sheet. For further details on duplex printing, refer to Duplex Printing on page 3-6. • To increase outside margins on the left side of the page, enter a number into the Left (long edge) box. This option may not be available, depending on your Orientation and Print on both sides settings in the Basic tab. • To increase outside margins at the top of the page, enter a number into the Top (long edge) box. This option may not be available, depending on your Orientation and Print on both sides settings in the Basic tab. • Since the Gutter feature shifts document data to the right or down, select the Reduce image to fit check box if the printed data extends beyond the edge of the paper when changing the gutter setting. The size of the printed data is decreased slightly to fit in the printable margins of the page. • If the document data is small enough that it does not extend beyond the edge of the paper when the gutter is increased, clear the Reduce image to fit check box. When you want to change the page size (for example, to enlarge an A4-size brochure for printing on A3 paper), refer to Print Sizes on page 3-2. The Staple feature is available on printing systems with an optional finishing device installed. If a 3000-sheet finisher and folding unit are installed, the Booklet printing feature is available. For further details, refer to Booklet on page 4-1. After installation, optional equipment must be selected in the printer driver in the Device Settings tab. For further details, refer to Installing Optional Devices on page 2-1. 5-4