Kyocera KM-C3225E Fax System (N) Operation Guide Rev-1.2 - Page 166
Performing the Operation at the Transmitting Fax, Reset, Start, IMPORTANT
View all Kyocera KM-C3225E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Other Features of this Fax Performing the Operation at the Transmitting Fax Encrypted Transmission is accomplished by dialing with a one-touch key that has been designated in advance for Encrypted Transmission. NOTE: Encrypted Transmission is possible to a single destination, as well as in combination with a Broadcast Transmission. F-Code Based Communication is not available for use with Encrypted Communications. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1 Register the Encryption Key agreed to in advance with the receiving party. (Refer to Registering New Encryption Keys on page 5-59.) NOTE: If the Encryption Key has already been registered, go directly to step 2. 2 Register the one-touch key that will be used to dial the destination fax number and designate it for Encrypted Transmission. Refer to Registering New One-Touch Keys on page 2-18. If a one-touch key has already been registered in this way, go directly to step 3. 3 Set the documents you want to transmit. 4 Use the one-touch key described in step 2 to enter the destination fax number. Ready for fax transmission. Press start key to transmit Dest .1 ABC. ABC. Memory OCT-11 Address book Basic Abbrev. Application 5 Press the Start key. The transmission operation will begin. TX setting Register Print Report IMPORTANT: If the Encryption Key Code designated for the one-touch key is no longer registered in this fax, an error will occur and the transmission will not be completed. Performing the Operation at the Receiving Fax Perform the following procedure in order to receive and print out documents under Encrypted Communication. NOTE: F-Code Based Communication is not available for use with Encrypted Communications. If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 5-64