Kyocera KM-C3225E KX Driver User Guide Version 5.90 - Page 48
Separation, Rotate Copies, Offset Jobs
View all Kyocera KM-C3225E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Finishing Separation Note: Each sheet is punched separately. When sheets are stacked, the holes may not line up exactly. You can increase the left or top margin to provide additional space for hole punches by using the Gutter feature. For further details, refer to Gutter on page 5-4. When multiple copies of a print job are printed, they can be difficult to separate in the output tray. The Separation feature stacks copies so that one can be clearly distinguished from another. Available options are: • Offset jobs physically shifts each print job in the output tray. • Rotate copies stacks each copy of a print job at right angles in the output tray. Rotate Copies Rotate copies stacks each copy of a print job at right angles in the output tray. This feature requires the following: • Paper size selections are limited to Letter, A4, 16K, or B5 (JIS). • The selected paper size must be loaded into two paper sources, one horizontally and one vertically. • The print job must contain multiple pages and be specified to print multiple copies. 1 From the application's Print dialog box, open Properties. (Select Print from the File menu, and select Properties.) 1 2 In the Basic tab, under Destination, select an option that is not a finishing tray, for example: Top tray (face-down) 2 3 Select a number of copies greater than 1. 3 4 Click the Finishing tab, then select Separation. The Rotate copies option is selected. 4 5 Click OK to return to the Print dialog box. 5 6 Click OK to start printing. 6 Your print job is stacked in the output tray with each copy alternating horizontally and vertically. Offset Jobs Offset jobs physically shifts each print job in the output tray. This feature requires an optional finishing device such as an Internal finisher or 1000-sheet finisher. For further details, refer to Installing Optional Devices on page 2-1. Note: To ensure consistent offset stacking, all users printing to the same printing system should select Offset jobs as the default setting. For further details, refer to Printer Properties on page 2-1. 5-7 KX Driver