Kyocera KM-C3225E Kyocera Command Center Operation Guide Rev 6.3 - Page 10
Start > Status s, Network > POP3/SMTP - scanner
View all Kyocera KM-C3225E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
COMMAND CENTER Pages This shows paper size and media type for cassettes and MP tray. Start > Status Pages These pages allow you to verify the various settings (machine, printing, scanning, network and E-mail) that were made on the operation panel or using COMMAND CENTER. It is divided by the following items. • Network • Security • Device/Printer • Scanner • FAX/i-FAX • Jobs • Counters Network > General This allows you to verify the current settings for LDAP, TCP/ IP, IPP, IPP over SSL, AppleTalk, NetBEUI, IPv4, and IPv6. For more information, refer to Advanced Page on page 3-35. Network > IP Filters This displays the list of IP addresses and subnet masks (IPv4) or prefix length (IPv6) that have access permission as set under IP Filters (IPv4) and IP Filters (IPv6) on the Advanced page. If no IP addresses have been designated, then access permission will be granted to all addresses. For more information, refer to Advanced > Protocols > TCP/IP > IP Filters on page 3-37. Network > SNMP This allows you to verify the settings made under SNMPv1/ v2 and SNMPv3 on the Advanced page. For more information on SNMPv1/v2, refer to Advanced > Management > SNMP > SNMPv1/v2c on page 3-44. For more information on SNMPv3, refer to Advanced > Management > SNMP > SNMPv3 on page 3-45. Network > POP3/SMTP This allows you to verify the E-mail-related settings made on POP3 and SMTP pages of the Advanced page. For more information on POP3, refer to Advanced > E-mail > POP3 > General on page 3-43. For more information on SMTP, refer to Advanced > E-mail > SMTP > General on page 3-41. Network > Logical Printers This allows you to verify the settings made on the Logical Printers page of the Advanced page. For more information, refer to Advanced > Protocols > TCP/IP > Logical Printers on page 3-38. Network > NetWare This allows you to verify the settings made on the NetWare page of the Advanced page. For more information, refer to Advanced > Protocols > NetWare on page 3-39. Security This allows you to verify the current settings for secure protocols, IEEE802.1x, and IPSec. To change the settings: For secure protocols, refer 3-3 User Guide