Kyocera KM-C3232 DF-730 Operation Guide Rev-2 - Page 10
Replenishing staples, holder paying due attention to
View all Kyocera KM-C3232 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
5. Open the top cover and remove any jammed paper inside that cover. 6. Close the top cover and the reversing unit cover and reattach the Document Finisher to the copier (or printer). Replenishing staples If an indication that staples have run out appears on the operation panel of the copier (or the message display of the printer), perform the following procedure. 1. Open the stapler cover. 2. Pull out the stapler holder. 3. Remove the empty staple cartridge from the staple holder. 4. Hold the staple holder in one hand and the new staple cartridge in the other, and set the new cartridge into the staple holder paying due attention to the direction of insertion. * Insert in the direction of the arrow shown on the staple cartridge. 5. Push the staple cartridge all the way into the staple holder and then peel off the paper tape that is attached to the cartridge. 8